Sustainable additive manufacturing: challenges and opportunities of recycling plastic waste for 3D printing filaments

Papers that cite this work

24 direct citing papers saved.

1. Unveiling fungal degradation pathways for polyurethane and polyethylene through enrichment cultures and metabolic analysis

   International Biodeterioration & Biodegradation · 2025-04-19

   Eyalira Jacob Okal, Jie Zhou, Yanfei Wu, Tingfang Zhong, Yue Jin Tang, Zhengyu Sun, Rui-Fang Xu, Yuwei Hu, Yuwei Hu, Na Hu, Jingxian Li, Samantha C. Karunarathna, Peter E. Mortimer, Shahid Iqbal, Jianchu Xu, Jianchu Xu, Heng Gui

   Read original paper ↗ · Show in map

2. Effect of Recycling and UV Ageing on the Properties of PLA-Based Materials Used in Additive Manufacturing

   Polymers · 2025-07-03

   Petr Jirků, Miroslav Müller, Rajesh Mishra, Jaroslava Svobodová

   Read original paper ↗ · Show in map

3. Innovative and best practices in sustainable strategies for waste reduction in additive manufacturing

   Hybrid Advances · 2025-07-22

   Kazeem Aderemi Bello, Rendani Wilson Maladzhi

   Read original paper ↗ · Show in map

4. Experimental and Machine Learning Investigation of Poly‐ε‐caprolactone‐MXene Composites for Methylene Blue Capture

   ChemistrySelect · 2025-09-26

   Alsha Subash, Vaishnavi Gajare, Minoo Naebe, Balasubramanian Kandasubramanian

   Read original paper ↗ · Show in map

5. Effects of ultra-cold temperature on thermoplastic (ASA, PLA) parts produced by 3D FDM printing technology

   Sadhana · 2025-09-27

   Yusuf Arslan

   Read original paper ↗ · Show in map

6. Harnessing computational modelling to drive progress in additive manufacturing: a state-of-the-art review

   Journal of Intelligent Manufacturing · 2025-10-11

   Sachin Kumar, Song Fu Gao, Mridul Goyal, Tushar Jindal, Manoj Kumar, Ashutosh Sharma, Ashutosh Sharma, Sharad Bhardwaj, Aditya Sharma, Aditya Sharma

   Read original paper ↗ · Show in map

7. Additive Manufacturing (AM): the future of sustainable manufacturing

   Elsevier eBooks · 2026-01-01

   Mushtaq Khan, Kamran Shah, Ashfaq Khan, Tabassam Yasmeen, Khan, M. K.; Prem Das; Inayat Masih; Dost, N. D.; Aajiz, Teej Ram;

   Read original paper ↗ · Show in map

8. Development of Feedstock Material Using Secondary Resources for Sustainable 3D Printing

   Springer Proceedings in Materials · 2026-01-01

   Suruchi Kumari, Dipali, Ram Krishna

   Read original paper ↗ · Show in map

9. Sustainable additive manufacturing: A review on 3D printing using recycled waste polymers

   Innovation and Emerging Technologies · 2026-01-01

   Upender Punia, Parveen Sihmar, Manjeet Chahar, Ramesh Kumar Garg, Ankit Tyagi, Hargovind Soni

   Read original paper ↗ · Show in map

10. Advancing circular additive manufacturing: Life cycle sustainability assessment of gears made from recycled polylactic acid

    Materials Today Sustainability · 2026-01-18

    Md. Raquibul Hasan, Ian Jeffery Davies, Alokesh Pramanik, Michele B. John, Wahidul K. Biswas

    Read original paper ↗ · Show in map

11. Recycling post-consumer polypropylene utensils into 3D printing filaments for fused filament fabrication

    Pure and Applied Chemistry · 2026-01-22

    Shu Yong Ong, Ming Yeng Chan, Seong Chun Koay, Thai Kiat Ong

    Read original paper ↗ · Show in map

12. Upcycling waste plastics into 3D printing filaments for a circular and sustainable future

    Polymer International · 2026-03-12

    Man Vir Singh, Amanpreet Kaur

    Read original paper ↗ · Show in map

13. Eco-smart PLA/carbon fiber/brine-salt composites: a triple waste-valorization route toward high-performance thermal, acoustic, and fire-resistant materials

    International Journal of Sustainable Engineering · 2026-03-26

    Noura Al-Mazrouei, Omar Abushabab, Sarmad Solaiman, Mostafa Said, Youssef Dahir, Ameera F. Mohammad

    Read original paper ↗ · Show in map

14. 27Chapter 2 Primary and secondary recycled 5D-printed thermoplastic composites for engineering applications

    De Gruyter eBooks · 2026-05-14

    Nishant Ranjan, Rupinder Singh

    Read original paper ↗ · Show in map

15. Fused Deposition Modeling of Polymer-Based Magnetic Composites from Recycled Permanent Magnets of Discarded Hard Drives

    Materials · 2026-06-02

    Duccio Gallichi Nottiani, Daniel Milanese, Fausto Franchini, Emir Pošković, Marco Actis Grande, Marta Ceroni, Luca Ferraris, Claudio Sangregorio, Claudia Innocenti, Martin Albino, Andréa Caneschi, Corrado Sciancalepore

    Read original paper ↗ · Show in map

16. Review on 3-D printed ABS polymer for rotary control elements

    World Journal of Engineering · 2026-06-04

    Mahendra Nana Vhatkar, Geetanjali Vijay Patil, Iresh G. Bhavi, Syed Abbas Ali

    Read original paper ↗ · Show in map

17. Analysis of sustainable printing materials using computed tomography and tensile testing for aeronautical applications

    Journal of Cleaner Production · 2026-06-22

    Claudia Alvarez, Diego Carou, David Álvarez, Eugenio López, Marcos Alonso

    Read original paper ↗ · Show in map

18. Development of 3D printing filament with recycled polypropylene by the extrusion process

    EUREKA Physics and Engineering · 2026-07-30

    I Made Gatot Karohika, Anak Agung Istri Agung Sri Komaladewi, Attila Maesa Jenar, I Made Widiyarta, Dewa Ngakan Ketut Putra Negara, Moch. Agus Choiron

    Read original paper ↗ · Show in map

19. Significance of 3D-Printed Biopolymer Composites for Sustainability: a Review of Engineering Applications

    Polymer Science Series A · 2026-08-01

    Ghaith M. Algharbi, Suha K. Shihab

    Read original paper ↗ · Show in map

20. Closing the Loop Locally: A Systematic Review and Framework for Distributed Recycling of Post-Consumer Plastics with a Focus on HDPE and PP

    Recycling · 2026-08-11

    Johan Montenegro, Carmen Castaño, Maria De Los Ángeles Ortega Del Rosario, Ricardo J. Caballero, Max Medina, Dennis Keiser, Michael Freitag

    Read original paper ↗ · Show in map

21. Automated failure detection and resumption after power interruption for FFF additively manufactured parts

    The International Journal of Advanced Manufacturing Technology · 2026-08-18

    Izzy Cossarin, Tim Clarke, Fereydoon Diba, Ali Hosseini

    Read original paper ↗ · Show in map

22. Integration of recycled thermoplastics and agricultural waste in natural fiber-reinforced composite filaments for 3D printing: An overview

    Journal of Thermoplastic Composite Materials · 2026-08-25

    N. H. Ibrahim, Nishata Royan Rajendran Royan, Aziz Ahmed, Faisal Ibney Hai

    Read original paper ↗ · Show in map

23. Intelligent Circular Polymer Additive Manufacturing: From Recycling Pathways to Lifecycle Engineering

    Polymers · 2026-09-04

    Francisco J. G. Silva, Filipa Pacheco, Naiara P. V. Sebbe, André F. V. Pedroso, Arnaldo G. Pinto

    Read original paper ↗ · Show in map

24. From permanent bonding to programmable separation: AI-enabled circular design of multimaterial polymer 3D-printed structures

    Next Materials · 2026-10-01

    Ahmed Intekhab Rohan, Mir Al Musaddek Fahim, Hasnat Jinnurain Mayaz, Afif Ajjan, Abtahy Kabir Chowdhury

    Read original paper ↗ · Show in map