BetaCitation Atlas

RESEARCH PAPER · Journal of Alloys and Compounds · 2024

A review on copper alloys with high strength and high electrical conductivity

Qingzhong Mao, Yanfang Liu, Yonghao Zhao

Read original paper ↗

See where this research leads.

226 direct citing papers in this saved network. Explore the next layer with second-order citations.

Open in your workspace →Saved 2026-10-14 · complete coverage
Filter Citing Papers
Press Enter or comma to add · × to remove · searches titles and available abstracts
Journals
All journals
Most represented first · select one or more
Explore Terms In These PapersHide SuggestionsShow Suggestions

Original and current center papers stay visible as anchors.
Numbers show citations received
42 direct citing works

A review on copper alloys with high strength and high electrical conductivityOriginalProperties and Microstructure Characterization of High-Strength, High-Conductivity and High-Resistance to Arc Ablation Cu-0.6te-0.3cr-0.15zr-0.008p Alloy0Research on Alloying Elements’ Influence on CuETP-Grade Copper’s Mechanical and Electrical Properties11Properties and microstructure characterisation of high-strength, high-conductivity and high-resistance to arc ablation Cu-0.6Te-0.3Cr-0.15Zr-0.008P alloy6Optimizing strength and electrical conductivity of 6201 aluminum alloy wire through rotary swaging and aging processes38Predictive Modeling and Analysis of Cu–Be Alloys: Insights into Material Properties and Performance2Effects of thermo-mechanical processing on microstructure and properties of Cu-0.9Hf alloy4Critical factors for enhancing electrical performance in LaGdO3 capacitor0Heat transfer, crack, and wear resistance of a newly designed heat-treated Ni/Cr multilayer composite coating for strip casting rolls2High-temperature tribological performance of Y2O3-Doped Cu-Zn self-lubricating composite by SPS11Determination of contamination, source, and risk of potentially toxic metals in fine road dust in a karst region of Southwest China5CARACTERIZAÇÃO DE NANOCOMPÓSITO À BASE DE COBRE SOB DIFERENTES CONDIÇÕES DE RECOZIMENTO0Flow stress softening with Be content increase in the hot compressed Cu-Be alloy7Sintering process optimization of the additively manufactured pure copper parts through the metal paste deposited process11Evolution of Properties of High-Strength and High-Mg-Content CuMg Alloys After Being Subjected to Single Operation 50% Deformation in Hot and Cold Upsetting Tests0Effect of Mn/P atomic ratio on the microstructure and properties of Cu-Mn-P alloy2Designing scheme of compositionally tuned high-strength and high-conductive copper alloy: a systematic phase transformation study4Copper catastrophic oxidation: Theory and mechanisms3Tailoring the microstructure, physical, and mechanical properties of pure copper using various additive manufacturing techniques29Precipitation characteristics and microstructure analysis of a Cu-Mn-Co-P alloy with high strength and high conductivity9Thermal and Electrical Conductivity of Aluminum Alloys: Fundamentals, structure-property relationships, and pathways to enhance conductivity88Investigation of additive manufacturing based direct ink writing of aluminium–copper alloys3Energy Absorption Characteristics and Forming Quality of Laser Powder Bed Fusion Fabricated Pure Cu Via Infrared-Green Lasers Strategy0Energy Absorption Characteristics and Forming Quality of Laser Powder Bed Fusion Fabricated Pure Cu Via Infrared-Green Lasers Strategy0High-strength and high-conductivity Cu-0.7Mg-0.1Ca alloy fabricated via heat treatment and severe plastic deformation0Microstructure and hot deformation behavior of the Cu-0.3Zr(-0.2Mg) alloys2Microstructures and Properties of In-Situ Formed Core-Shell (Taticr)B2 Particles Reinforced Copper Matrix Composites Prepared Via Casting0Synergistic microwave–metal interactions in polyurethane/biomass co-pyrolysis: unraveling reaction mechanisms and product selectivity control5Potential Corrosion Inhibition Properties of Flavone Derivatives on the Cu(111) Surface: A Combined DFT and Monte Carlo Simulation Study16Research Progress of Cu-Ni-Si Series Alloys for Lead Frames13Fabrication of copper composites containing 3D graphene-like carbon network18Study on the microstructure, properties and strengthening mechanisms of electrophoretic deposited carbon-nanotubes/Cu composites9Influence of the Initial State of Cu–0.6Cr–0.1Zr Alloy on Changes in Structure and Properties during High-Pressure Torsion0Multi-property evaluation of low Cu content Fe-Cu magnetic alloys4Diffusion-induced phase strengthening and interfacial stabilization of Cu-TiZrNbTa composites by SPS adjustment7High-temperature pre-aging induced coherent precipitation for Concurrent strength and conductivity enhancement in Cu-Mn-Co-P alloys5Enhancing the mechanical properties of copper matrix composites through nickel-grafted carbon nanotubes prepared by molecular-level mixing and self-reduction methods9Synergistic enhancement of strength-ductility in ODS copper alloy by exploring heterogeneous structure13Unraveling the effect of trace sulfur content on hot working behavior of Cu-DHP alloy: A study using processing maps9Femtosecond laser-induced localized electrodeposition of two dimensional metal patterns9A comparative study of Cu(II) biosorption onto dried activated sludge of different sludge ages2Microstructural, mechanical and electrical properties of aluminum-copper butt joints produced by high-speed friction stir welding11Designing B2-phase ordered Cu-Pd-Ag-Ru microfiber with strength-conductivity combination via melt-extraction and isothermal annealing5Recent development of copper, silver and their bimetallic nanoparticles: Next-generation antibacterial agents through photocatalysis activity11Enhanced strength and ductility of pure copper at liquid nitrogen temperature1Influence of sulphur content on the hot deformation behaviour and constitutive description of Cu-DHP alloy1High strength and high conductivity pure copper prepared by ECAP-Conform combined with cryogenic rolling and recrystallization annealing14Janus nanocellulose composite films with superior electromagnetic interference shielding and dual-thermal management19Fragmentation of Cu2O Oxides Caused by Various States of Stress Resulting from Extreme Plastic Deformation2Multi-layer structure improves wear and corrosion resistance of chromium14Stretchable and Self-Adhesive PEDOT:PSS Electrode for Fully Integrated and Long-Term Electrocardiogram Monitoring10Temperature-dependent mechanical properties and fracture behaviors of copper foils with different microstructures8Vertically aligned hollow Ag@Ni tubes for synergistic EMI shielding and enhancing the thermal conductivities of epoxy composites5High strength, high ductility and high conductivity achieved in graphene nanosheets (GNSs)/copper alloy via laser powder bed fusion14Laser cladding of heterogeneous structured Cu-Cr-W-SiC coatings with balanced electrical conductivity and wear resistance12Heavy metals in the environment: Detection techniques and toxicity2Evaluation of electronic transport properties of one-dimensional Ta Se 3 based on first-principles calculations3Enhanced strength and conductivity of CuCrZr/CuAlCrFeNi2.5 multi-principal element alloy composite via interface and configuration engineering3Simultaneous enhancement of mechanical properties and electrical conductivity in Cu-Ni-Si alloy by constrained groove pressing and aging treatments15Ultrafast phase transformation and strengthening mechanisms in alloys induced by femtosecond laser shock: a novel strategy for intermetallic control19Effect of Mg on the hot deformation behavior and microstructure evolution of the Cu-0.6Cr alloy6Tailoring heterogenous microstructure of Cu-Al alloy to optimize mechanical properties by rotary swaging and annealing4The Effect of Annealing Conditions on Copper's Brittleness and Powder Production Efficiency2Enhanced thermal stability of nanocrystalline Cu composites processed by high-pressure torsion: The pinning effect of Al₂O₃, GO, and rGO/Al₂O₃ nanoparticles9Effect of annealing on the wear performance of MAO coatings1Microstructural evolution and mechanical performance of Cu-W composites in underwater friction stir processing3Synergistic reinforcement of copper matrix composites with MoSi2 and graphene: microstructure, mechanical properties, and tribological performance13Friction stir processing of Cu-W composites: effects of pre-strain and traverse speed on microstructure and functional behavior0Extraction of high-purity copper from CuCl via molten salt electrolysis: Towards efficient copper recovery from waste printed circuit boards10Negative thermal expansion in metamaterials made from 4D printed Cu–Al–Ni alloy9Features of structure formation and properties of cast titanium bronzes obtained using thermally synthesized powder ligatures0Enhancing mechanical and electrical properties of the Cu-0.2Be-1.0Ni alloy via dual plastic deformations4High-throughput method accelerating design of copper alloys2Inverse Hall-Petch and nanocrystal-amorphous transition of broad-spectrum W content NiW alloys8Electrochemical and quantum chemical investigation on the adsorption behavior of pyrazole-pyridine derivative for corrosion protection of copper in sulfuric acid medium5The role of discontinuous precipitation in the corrosion process of Cu-Ni-Si alloys: Rebar and firewall effects7Hybrid manufacturing and mechanics of copper-based architected materials and copper–aluminum interpenetrating phase composites16Effect of Sn Addition on Microstructural Evolution and Properties of Cu–Ag Alloys5Effect of Fe and Ti solute concentrations on the double-peak hardening behavior of Cu-Fe-Ti alloys1Optimization of single crystal surface and interface structures for electrocatalysis13Effect of Cu content on the microstructure and mechanical properties of Cu–Fe alloys: study on tensile fracture behavior2Simulation and Experimental Investigation of Cu-3Ti-3Ni Alloy with Addition of Yttrium0How surface treatment of porous copper samples dictates dry friction and wear2Study on the correlation between annealing temperature and the gradient microstructure and residual stress in lead frame copper strip5Effects of Cu@Sn@Ag core-shell particles on microstructure, corrosion and mechanical properties of SAC305 solder joint9Review of electrical conductivity in magnesium alloys: Mechanisms, strategies and applications17Enhanced corrosion resistance through the synergistic effect of Cu2O oxide layers and fatty acids2Mechanism study on nanometric finishing of copper by electrochemical polishing using sulfuric acid/methanol electrolyte3Study on the compression molding of pure Cu powder particles with a normal distribution of particle size1Copper‐Induced Phase Transitions in NaMn 1‐x Cu x O 2 : Structural Insights from Operando XAS, DFT Calculations, and Electrochemical Evaluation Using Laurus Nobilis‐Derived Hard Carbon11Yttria enhanced CuCr composites fabricated by laser powder bed fusion: Microstructure, properties and strengthening mechanisms6Enhancement of mechanical properties and fatigue performance of pure copper through GP and TaC reinforcements in metal matrix composites6Effect of Electromagnetic Stirring on Microstructure Evolution and Mechanical/Electrical Properties of Cu‐25%Ag Alloy Wires1Strength–conductivity synergy in Cu–Cr alloy induced by rotary swaging: Microstructure reconstruction and interface optimization5Powder bed fusion of pure copper using an electron beam: a comparative study on the material properties obtained using vector- and spot-based exposure6Microstructure-sensitive fatigue modeling of High-Speed Friction Stir Butt Welding of dissimilar joints AA6061-T6 to copper0Optimization of electrical contact properties and arc erosion resistance of Mo–W–Cu ternary contact materials prepared via hydrogen sintering under DC arc conditions6Microstructure and Mechanical Performance of Cu and Gr/Cu Composites: Experimental and Ab Initio Insights2Achieving corrosion-resistant hydrophobic coating on copper–zinc alloy via micro-arc oxidation and heat treatment3Microstructure and properties of Cu-5wt.% Fe alloys fabricated by magneto-Archimedes levitation and dual-stage thermomechanical processing2Comparing Conventional Cold Compaction and Sintering and Spark Plasma Sintering in Consolidating Mechanically Alloyed Cu-Based Cu–Zr Supersaturated Alloy Powder1Effect of interface orientation in laser powder bed fusion of IN718/GRCop-42 bimetallic parts for Aerospace4Research on the microstructure and properties of Cu-Ni-Si-Ti alloys with micro-nano hybrid systems10Effect of Annealing Temperature on the Formability of Copper Foils during Multi-Pass Micro-Rolling Process1The oxidation mechanism of heterogeneous structured Cu-316L-xMo immiscible alloys by laser powder bed fusion1Effect of AlCoCrFeNi2.1 high entropy alloy filling content on the microstructure and mechanical properties of copper matrix composites fabricated by friction stir processing7Effects of temperature and strain rate on mechanical behavior and microstructure evolution of CuNiSiCr alloy3Optimization of Microstructure, Mechanical Properties, and Wear Resistance of Cu 45 Mn 8 Ni 30 Co 10 Sn 7 High‐Entropy Bronze Alloy Through Solution‐Aging Treatment0Effect of Addition of Cr on the Structural Properties of Copper Films on BaTiO3 Ceramic Substrates2Copper Grid Lines Electrodepositing Assisted with High-Resolution Lithography0Effect of Magnetic Field on Electrochemical Corrosion Behavior of H62 Brass Alloy1Zr-induced GP zones and their role in strengthening and toughening Cu-Al alloys3Development of an imidazopyridine derivative: A Cu2+-selective probe with antimicrobial, molecular docking, and ADMET profiles2Impact Deformation Characteristics and Mechanism Analysis of Copper–Aluminum Laminated Interface with Wave Impedance Mismatch3Microstructure evolution and mechanical/electrical property enhancement of graphene-copper composites via equal channel angular pressing processing3Tribological and electrical properties of laser-clad W–Cu coatings on 7075 aluminum alloy3Advances in Laser Powder Bed Fusion of Copper and Copper Alloys: Microstructure, Mechanical Behavior, and Conductivity10Degradation mechanisms of electrical and mechanical properties in ZrB 2 /Cu composites under thermal fatigue0Influence of Titanium Content on the Microstructure and Tensile Behavior of Cold-Spray Additively Manufactured Copper-Titanium Composites0Effect of TiC content on the microstructure and properties of Cu matrix composites with enhanced softening and wear resistance10Enabling synergistic mechanical strength and high electrical conductivity in cold-rolled graphene/copper laminate composite via trace graphene and controlled orientation5Effect of pH on chalcopyrite leaching with phosphate for copper recovery0Sintering controlled heterogeneous structures in Ti3AlC2-Cu composites showing superior tribological properties2Investigation of latent heat storage performance of a solar collector incorporating dimpled dendritic fins and nano-additive phase change material2Vorticity-driven heat transfer and thermo–hydraulic trade-offs in selective-laser-melted CuCrZr minimal-surface heat exchangers4Bridging material models across scales: An integrated approach to equation of state and molecular dynamics modeling of copper2The effect of rotary swaging on the microstructure and mechanical properties of brass L63 alloyed with Sn1Mechanistic insights into Mg microalloying enhanced precipitation behavior, structural stability, and strength-conductivity synergy in Cu-Ni-Co-Si alloys0Advanced manufacturing and systematic evaluation of copper composites via deformation driven metallurgy2A machine learning strategy to achieve strength-conductivity-ductility synergy of high‐performance Cu-Ni-Co-Si alloys via rolling and aging process15Achieving self-supported nanoporous Cu catalysts with good conductivity for hydrogen evolution via dealloying amorphous ribbons5Copper Materials: properties, manufacturing, and future prospects0Enhanced thermal conductivity of SiC-coated diamond/Al composites for heat dissipation interfaces in power modules0Investigating the synergistic strengthening in additively manufactured CuCrZr alloys: an in situ study of heterogeneous microstructure deformation and CPFEM analysis0Study on microstructure and properties of Cu-Cr-Zr-Mg alloy with various Y contents and aging parameters3Data-driven discovery of copper alloys: resolving the strength-conductivity paradox1From battery recycling to ion-transport-triggered hydrovoltaic capacitor employing graphene nanosheet anode prepared via one-step cathodic plasma exfoliation2Study on the microstructure and properties of graphene and carbon nanotubes cooperatively reinforced copper composites by spark plasma sintering and hot rolling3Size evolution of multimodal nanoprecipitates and synergistic strength-conductivity mechanisms in LPBF-processed Cu-Cr-Nb alloys2Optimizing Cu-Cu bonding quality in nanotwinned Cu films through plasma-induced surface roughening5In-situ formation of TiB2 particles reinforced copper matrix composites via solid-state diffusion reaction1SLM-Fabricated CuCrZr TPMS Heat Exchangers: Influence of Structural Design on Fluid Transport Characteristics4Synergistic tailoring of strength and conductivity in a Cu–Ni–Ti alloy via cobalt microalloying and a short-process route3Theoretical study on three-dimensional impact propagation on the surface of nanohole-containing Cu substrates in electrochemical discharge0Preparation of phosphor bronze powders by arc erosion of wires: Microstructure and mechanical properties2Achieving superior high-temperature strength–ductility synergy in a Cu–Ag–Zr alloy via trace Ce doping induced atomic substitution and precipitate refinement4An Overview of Aluminum Windings and Their Manufacturing Technologies in Electrical Machines1Multipurpose Paper-Based Sensors by Hydrogel-Assisted Metal Deposition0Numerical analysis and experiment validation of droplet transition types for thermal fluid dynamics in wire arc additive manufacturing CuCrZr alloy0Corrosion-Resistant Cu/Graphene Nanocomposite-Based Electrodes for Advanced Electrochemical Measurements0Fabrication and Characterization of Graphene-Copper Composite Wires Using Chemical Vapor Deposition and Roller Drawing Techniques0

Arrows point to the paper being cited. Selecting a paper shows its incoming citations and its known path back to the original paper.

Drag to pan · Use + / − to zoom · Escape to close43 nodes / 53 citation links
Browse Matching Papers

Papers that cite this work

226 direct citing papers saved. Showing the first 50 here; use Browse Matching Papers in the map for all loaded papers.

  1. Properties and Microstructure Characterization of High-Strength, High-Conductivity and High-Resistance to Arc Ablation Cu-0.6te-0.3cr-0.15zr-0.008p Alloy

    SSRN Electronic Journal · 2024-01-01

    Tianyang Luan, Tongchang Gao, Jiamin Zhao, Hangchen Xu, Fudi Wang, Xiangyu Yu, Liuxiong Luo, Zhuoran Xia, Shen Gong

    Read original paper ↗ ·

  2. Research on Alloying Elements’ Influence on CuETP-Grade Copper’s Mechanical and Electrical Properties

    Materials · 2024-06-20

    Krystian Franczak, Michał Sadzikowski, P. Kwaśniewski, G. Kiesiewicz, Wojciech Ściężor, Szymon Kordaszewski

    Read original paper ↗ ·

  3. Properties and microstructure characterisation of high-strength, high-conductivity and high-resistance to arc ablation Cu-0.6Te-0.3Cr-0.15Zr-0.008P alloy

    Materials Characterization · 2024-06-21

    Tianyang Luan, Tongchang Gao, Jiamin Zhao, Hangchen Xu, Fudi Wang, Xiangyu Yu, Liuxiong Luo, Zhuoran Xia, Shen Gong

    Read original paper ↗ ·

  4. Optimizing strength and electrical conductivity of 6201 aluminum alloy wire through rotary swaging and aging processes

    Journal of Materials Processing Technology · 2024-07-06

    Qingzhong Mao, Long Wang, Jinfeng Nie, Yonghao Zhao

    Read original paper ↗ ·

  5. Predictive Modeling and Analysis of Cu–Be Alloys: Insights into Material Properties and Performance

    ChemEngineering · 2024-07-10

    Mihail Kolev

    Read original paper ↗ ·

  6. Effects of thermo-mechanical processing on microstructure and properties of Cu-0.9Hf alloy

    Journal of Alloys and Compounds · 2024-07-16

    Yanlin Jia, Linhan Li, Xianfeng Liao, Xin Zhao, Ying Li, Yufang Zhang, Zhou Li, Yong Pang, Yi Jiang

    Read original paper ↗ ·

  7. Critical factors for enhancing electrical performance in LaGdO3 capacitor

    Materials Science and Engineering B · 2024-07-27

    Tzu-Yu Huang, Tzu-Yu Huang, Ching-Cheng Huang, Ching-Cheng Huang, Meng‐Hung Tsai, Cheng‐Liang Huang, Cheng‐Liang Huang

    Read original paper ↗ ·

  8. Heat transfer, crack, and wear resistance of a newly designed heat-treated Ni/Cr multilayer composite coating for strip casting rolls

    Materials Letters · 2024-08-05

    Zhipeng Pan, Wanlin Wang, Xu Gao, Cheng Lu, Haoyu Wang, Chenyang Zhu

    Read original paper ↗ ·

  9. High-temperature tribological performance of Y2O3-Doped Cu-Zn self-lubricating composite by SPS

    Tribology International · 2024-08-12

    Xinyun Zhang, Nan Geng, Shang Jiang, Yicong Liu, Junhu Meng, Yang Cao, Junde Guo

    Read original paper ↗ ·

  10. Determination of contamination, source, and risk of potentially toxic metals in fine road dust in a karst region of Southwest China

    Environmental Geochemistry and Health · 2024-08-28

    Yingsen Zhang, Xinwei Lu, Xiufeng Han, Tong Zhu, Bo Yu, Zhenze Wang, Kai Lei, Yufan Yang, Sijia Deng

    Read original paper ↗ ·

  11. CARACTERIZAÇÃO DE NANOCOMPÓSITO À BASE DE COBRE SOB DIFERENTES CONDIÇÕES DE RECOZIMENTO

    ABM Proceedings · 2024-09-01

    NAYARA JANSON, CAMILA DOS SANTOS GONÇALVES, ANGELO PAULUCCI DE CARVALHO, GUILHERME SCHNEIDER POREPP, MAURÍCIO DIRONG BÖHLK

    Read original paper ↗ ·

  12. Flow stress softening with Be content increase in the hot compressed Cu-Be alloy

    Materials Letters · 2024-10-05

    Zhiya Zhao, Daibo Zhu, Chengbo Li, Yang Liu, Yanbin Jiang, Shuhui Cui, Lingxue Ouyang, Bingchan Ren

    Read original paper ↗ ·

  13. Sintering process optimization of the additively manufactured pure copper parts through the metal paste deposited process

    Journal of Alloys and Compounds · 2024-10-09

    Reza Alaghmandfard, Yahya Aghayar, David F. Ester, Mohsen Mohammadi, Jaimie Borisoff, Kim Dotto

    Read original paper ↗ ·

  14. Evolution of Properties of High-Strength and High-Mg-Content CuMg Alloys After Being Subjected to Single Operation 50% Deformation in Hot and Cold Upsetting Tests

    Materials · 2024-11-08

    Paweł Strzępek, Małgorzata Zasadzińska, Piotr Noga, Tomasz Skrzekut

    Read original paper ↗ ·

  15. Effect of Mn/P atomic ratio on the microstructure and properties of Cu-Mn-P alloy

    Journal of Alloys and Compounds · 2024-11-22

    Chengzhi Zhang, Xue Xiao, Rui Zhou, Weilin Gao, Qingkui Li, Jilin He

    Read original paper ↗ ·

  16. Designing scheme of compositionally tuned high-strength and high-conductive copper alloy: a systematic phase transformation study

    Journal of Materials Science · 2024-12-05

    Nidhi Shukla, Shyam Kanta Sinha, Bushra Munir, C. Srishilan, Chandan Srivastava, Suman Sarkar

    Read original paper ↗ ·

  17. Copper catastrophic oxidation: Theory and mechanisms

    The Journal of Chemical Physics · 2024-12-24

    Valery V. Belousov

    Read original paper ↗ ·

  18. Tailoring the microstructure, physical, and mechanical properties of pure copper using various additive manufacturing techniques

    Journal of Alloys and Compounds · 2024-12-26

    Yahya Aghayar, Parisa Moazzen, Leo A. I. Kestens, Mohsen Mohammadi

    Read original paper ↗ ·

  19. Precipitation characteristics and microstructure analysis of a Cu-Mn-Co-P alloy with high strength and high conductivity

    Materials Science and Engineering A · 2024-12-28

    Chengzhi Zhang, Wendi Yang, Rui Zhou, Xue Xiao, Weilin Gao, Qingkui Li, Jilin He

    Read original paper ↗ ·

  20. Thermal and Electrical Conductivity of Aluminum Alloys: Fundamentals, structure-property relationships, and pathways to enhance conductivity

    Materials Science and Engineering A · 2024-12-30

    Kentaro F. Lunn, Diran Apelian

    Read original paper ↗ ·

  21. Investigation of additive manufacturing based direct ink writing of aluminium–copper alloys

    Journal of materials research/Pratt's guide to venture capital sources · 2024-12-31

    A. Anbarasan, K. Kanthavel, M. Sakthivel

    Read original paper ↗ ·

  22. Energy Absorption Characteristics and Forming Quality of Laser Powder Bed Fusion Fabricated Pure Cu Via Infrared-Green Lasers Strategy

    SSRN Electronic Journal · 2025-01-01

    Lihua Sun, Yongqiang Yang, Chenrong Ling, Jinrong Tang, Xiaoqiang Zheng, Pengju Wang, Renwu Jiang, Xingchen Yan, Yingjie Zhang, Di Wang

    Read original paper ↗ ·

  23. Energy Absorption Characteristics and Forming Quality of Laser Powder Bed Fusion Fabricated Pure Cu Via Infrared-Green Lasers Strategy

    SSRN Electronic Journal · 2025-01-01

    Lihua Sun, Yongqiang Yang, Chenrong Ling, Jinrong Tang, Xiaoqiang Zheng, Pengju Wang, Renwu Jiang, Xingchen Yan, Yingjie Zhang, Di Wang

    Read original paper ↗ ·

  24. High-strength and high-conductivity Cu-0.7Mg-0.1Ca alloy fabricated via heat treatment and severe plastic deformation

    Journal of Mining and Metallurgy Section B Metallurgy · 2025-01-01

    Alireza Kalhor, Kinga Rodak, Hanna Myalska‐Głowacka, Bartosz Chmiela, Karol Kuglarz, Ivo Schindler, Krzysztof Radwański, Marian Kampik

    Read original paper ↗ ·

  25. Microstructure and hot deformation behavior of the Cu-0.3Zr(-0.2Mg) alloys

    Materials Today Communications · 2025-01-01

    Xiaobo Li, Jing Ke, Meng Zhou, Chunhe Chu, Yi Zhang, Baohong Tian, Yong Liu, Qimeng Zhang, Wenhao He, Shuzhi Ma

    Read original paper ↗ ·

  26. Microstructures and Properties of In-Situ Formed Core-Shell (Taticr)B2 Particles Reinforced Copper Matrix Composites Prepared Via Casting

    SSRN Electronic Journal · 2025-01-01

    D. Z. Hang, Yihui Jiang, Fei Cao, Xingde Zhang, Pengtao Li, Yihang Pang, Wenhao Yang, Tian Yang, Wei Feng Zhou, Yanfang Wang, Kai Sun, Shuhua Liang

    Read original paper ↗ ·

  27. Synergistic microwave–metal interactions in polyurethane/biomass co-pyrolysis: unraveling reaction mechanisms and product selectivity control

    Green Chemistry · 2025-01-01

    Yu Ni, Shanjian Liu, Weiming Yi, Jiyan Ma, Qing Dong, Chengxizi Zhang

    Read original paper ↗ ·

  28. Potential Corrosion Inhibition Properties of Flavone Derivatives on the Cu(111) Surface: A Combined DFT and Monte Carlo Simulation Study

    Journal of Fluorescence · 2025-01-08

    Rebaz Anwar Omer, Yousif Hussein Azeez, Rebaz Obaıd Kareem, Lana Omer Ahmed, Damir Amirovich Safin

    Read original paper ↗ ·

  29. Research Progress of Cu-Ni-Si Series Alloys for Lead Frames

    Coatings · 2025-01-15

    Huan Yan, Honglei Hu, Lei Li, Wen Hung Huang, Chunlei Li

    Read original paper ↗ ·

  30. Fabrication of copper composites containing 3D graphene-like carbon network

    Journal of Alloys and Compounds · 2025-01-16

    Delong He, Oussama KEDDACHE, Mingyu Zhou, Yi Ding, Jinbo Bai

    Read original paper ↗ ·

  31. Study on the microstructure, properties and strengthening mechanisms of electrophoretic deposited carbon-nanotubes/Cu composites

    Materials Characterization · 2025-01-28

    Hanqun Wu, Liping Deng, Xincheng Pan, Bingshu Wang, Hongliang Xiang

    Read original paper ↗ ·

  32. Influence of the Initial State of Cu–0.6Cr–0.1Zr Alloy on Changes in Structure and Properties during High-Pressure Torsion

    Russian Journal of Non-Ferrous Metals · 2025-02-01

    D. A. Aksenov, Фаизова Светлана Никитична

    Read original paper ↗ ·

  33. Multi-property evaluation of low Cu content Fe-Cu magnetic alloys

    Materials Research Bulletin · 2025-02-13

    Li Ping Tan, Karl Peter Davidson, Mehmet Cagirici, Xuesong Xu, Shakti P. Padhy, V. Chaudhary, Raju V. Ramanujan

    Read original paper ↗ ·

  34. Diffusion-induced phase strengthening and interfacial stabilization of Cu-TiZrNbTa composites by SPS adjustment

    Journal of Materials Research and Technology · 2025-02-19

    Jie Chen, Zeyun Cai, Bohua Yu, Tao Hong, Ning Ding, Hongmei Chen, Ao Du, Ye Liu, Weizong Bao, Guoqiang Xie

    Read original paper ↗ ·

  35. High-temperature pre-aging induced coherent precipitation for Concurrent strength and conductivity enhancement in Cu-Mn-Co-P alloys

    Materials Science and Engineering A · 2025-02-19

    Chengzhi Zhang, Rui Zhou, Xue Xiao, Yuhan Wang, Weilin Gao, Qingkui Li, Jilin He

    Read original paper ↗ ·

  36. Enhancing the mechanical properties of copper matrix composites through nickel-grafted carbon nanotubes prepared by molecular-level mixing and self-reduction methods

    Journal of Alloys and Compounds · 2025-03-01

    Bin Ya, Fanqi Meng, Yang Xu, Bingwen Zhou, Linggang Meng, Xingguo Zhang

    Read original paper ↗ ·

  37. Synergistic enhancement of strength-ductility in ODS copper alloy by exploring heterogeneous structure

    Materials Science and Engineering A · 2025-03-11

    Yang Li, Cunguang Chen, Wei Sun, Miao Qi, Jie Yan, Changle Zhang, Han Liu, Han Liu, Yang Ren, Xinhua Liu

    Read original paper ↗ ·

  38. Unraveling the effect of trace sulfur content on hot working behavior of Cu-DHP alloy: A study using processing maps

    Materials Chemistry and Physics · 2025-03-17

    Milad Maleki, Mohammad Javad Sohrabi, Hamed Farzad, Hamed Mirzadeh, Mohammad Habibi Parsa, Reza Miresmaeili, Seyed Hossein Razavi

    Read original paper ↗ ·

  39. Femtosecond laser-induced localized electrodeposition of two dimensional metal patterns

    Optics & Laser Technology · 2025-03-23

    Hanhan Wei, Wanfei Ren, Jinkai Xu, Guodong Zhang, Jiaji Cao, Zhaoqiang Zou

    Read original paper ↗ ·

  40. A comparative study of Cu(II) biosorption onto dried activated sludge of different sludge ages

    Pure and Applied Chemistry · 2025-03-25

    Menghan Wang, Amira Suriaty Yaakop, Si Ling Ng

    Read original paper ↗ ·

  41. Microstructural, mechanical and electrical properties of aluminum-copper butt joints produced by high-speed friction stir welding

    Materials Characterization · 2025-03-25

    Zahra Silvayeh, Marta Orłowska, Sebastian Fritsche, Felix Schindler, Peter L. Auer, Andreas Hütter, Gean Henrique Marcatto de Oliveira, Norbert Enzinger, Josef Domitner

    Read original paper ↗ ·

  42. Designing B2-phase ordered Cu-Pd-Ag-Ru microfiber with strength-conductivity combination via melt-extraction and isothermal annealing

    Intermetallics · 2025-03-27

    Y.Y. Sun, Y. Gao, Y.H. Gao, Yongjiang Huang, Y.B. Wang, Y. Huang, Mengqi Jian, F.C. Wang, F.C. Wang, Y. Li, L. Fu, X. Jin, H.B.C. Yin, Juntao Huo, Feng Si, J.Q. Wang, Juntao Huo, Meng Jiao Gao

    Read original paper ↗ ·

  43. Recent development of copper, silver and their bimetallic nanoparticles: Next-generation antibacterial agents through photocatalysis activity

    Journal of Water Process Engineering · 2025-03-29

    Jing Chang Chia, Chin Wei Lai, Joon Ching Juan, Ethan Dern Huang Kong, Madelyn Wen Qian Teoh, Amit Kumar, Gaurav Sharma, Irfan Anjum Badruddin

    Read original paper ↗ ·

  44. Enhanced strength and ductility of pure copper at liquid nitrogen temperature

    Journal of Alloys and Compounds · 2025-04-01

    Wangjun Cheng, Yue Chun Zhao, Acong Meng, Senjun Yang

    Read original paper ↗ ·

  45. Influence of sulphur content on the hot deformation behaviour and constitutive description of Cu-DHP alloy

    Canadian Metallurgical Quarterly · 2025-04-02

    Alireza Kalhor, Kinga Rodak, Mohammad Javad Sohrabi, Milad Maleki, Mohammad Mobasheri, Hamed Mirzadeh, Mohammad Habibi Parsa

    Read original paper ↗ ·

  46. High strength and high conductivity pure copper prepared by ECAP-Conform combined with cryogenic rolling and recrystallization annealing

    Journal of Materials Research and Technology · 2025-04-05

    Yuehong Zheng, Jianan Niu, Ying Lu, Shipeng Xu, Zhumin Li, He Zhao, Peiqing La

    Read original paper ↗ ·

  47. Janus nanocellulose composite films with superior electromagnetic interference shielding and dual-thermal management

    Carbohydrate Polymers · 2025-04-09

    Lujie Wang, Dingfeng Xu, Jinping Zhou

    Read original paper ↗ ·

  48. Fragmentation of Cu2O Oxides Caused by Various States of Stress Resulting from Extreme Plastic Deformation

    Materials · 2025-04-10

    Małgorzata Zasadzińska

    Read original paper ↗ ·

  49. Multi-layer structure improves wear and corrosion resistance of chromium

    Surface and Coatings Technology · 2025-04-15

    Xingwen Zhang, Qingzhong Mao, Zhifei Yu, Shaojia Shi, Zhan Liu, Yonghao Zhao

    Read original paper ↗ ·

  50. Stretchable and Self-Adhesive PEDOT:PSS Electrode for Fully Integrated and Long-Term Electrocardiogram Monitoring

    ACS Applied Polymer Materials · 2025-04-17

    Ge Ren, Jiale Yang, Xuanting Wang, Guangmei Hu, Hua Chen, Qing Fang, Anneng Yang

    Read original paper ↗ ·
More citing papers →
Citation Atlas · A map of research, not a ranking.