BetaCitation Atlas

RESEARCH PAPER · Acta Materialia · 2021

High diffusivity pathways govern massively enhanced oxidation during tribological sliding

Julia Rau, Shanoob Balachandran, Reinhard Schneider, Peter Gumbsch, Baptiste Gault, Christian Greiner

Read original paper ↗

See where this research leads.

47 direct citing papers in this saved network. Explore the next layer with second-order citations.

Open in your workspace →Saved 2026-10-12 · complete coverage
Filter Citing Papers
Press Enter or comma to add · × to remove · searches titles and available abstracts
Journals
All journals
Most represented first · select one or more
Explore Terms In These PapersHide SuggestionsShow Suggestions

Original and current center papers stay visible as anchors.
Numbers show citations received
42 direct citing works

High diffusivity pathways govern massively enhanced oxidation during tribological slidingOriginalThree regimes in the tribo-oxidation of high purity copper at temperatures of up to 150 $^\circ$C1Metal matrix nanocomposites in tribology: Manufacturing, performance, and mechanisms110Three Regimes in the Tribo‐Oxidation of High Purity Copper at Temperatures of up to 150 °C12Heterostructured stainless steel: Properties, current trends, and future perspectives276Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios15Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions5Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear82A novel wear-resistant Ni-based superalloy via high Cr-induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures74Investigations on the microstructures and tribological behaviors of as-cast CrFeCoNiCux high entropy alloys14Microstructural evolution and tribological behavior of suspension plasma sprayed CuO as high-temperature lubricious coatings22Microstructural evolution and oxidation in α/β titanium alloy under fretting fatigue loading18Sequence and mechanism of early microstructure evolution in alloy 690TT subjected to fretting corrosion in high temperature pressurized water9Stress-dependent subsurface structural transformations of gradient nanograin Ti–6Al–4V alloy and its impact on wear behavior8Unraveling the Wear Mechanism of Ti(C, N)-Based Cermet Tools During High-Speed Cutting0Sliding wear-induced compositional lamination in a VCoNi alloy at elevated temperatures, and its implications for reduced friction and wear56Effect of low-temperature plasma nitriding on the sliding wear behavior of 17–4PH stainless steel in high temperature water4Significantly lowering friction and wear of CoCrNi medium-entropy alloy film via massive interstitial carbon-induced amorphization47Cutting performance and wear mechanism of submicron and ultrafine Ti(C, N)-based cermets21Grain size effect on tribocorrosion kinetics in ultrahigh-purity magnesium14New Method to Recover Activation Energy: Application to Copper Oxidation1The impact fretting corrosion behavior and damage mechanism of Inconel 690TT under different impact forces in high temperature pressurized water9Oxidation of a zirconium nitride multilayer-covered knee implant after two years in clinical use4A comparative study of the differences in microstructure and properties of tribo-layers of DD5 nickel-based single-crystal superalloys caused by external heat and friction heat in dry sliding wear9Evolution of nanocrystalline “glaze” layers and subsurface ultrafine grain layers in high-temperature sliding wear8Insights into the fretting corrosion behavior and damage mechanism of Inconel 690TT in water and steam environments containing different dissolved oxygen levels2Wear behavior and microstructural evolution of a BCC-HCP dual-phase TiZrNbMoTa refractory high-entropy alloy at room and elevated temperatures37Oxidation of a ZrN knee implant coating under in-vitro wear simulation0Achieving well-balanced mechanical and high-temperature tribological properties of Ni20Cr-based alloy via heterogeneous microstructure and oxidation regulation11Tribological behavior of novel Al–La–Mg–Mn alloy fabricated by laser powder bed fusion1Transition of Microscale Tribological Regimes from Severe Plastic Deformation to Lubricant Precipitation with Rising Temperatures4Tribo-induced special nano-heterostructures to achieve ultra-high-speed rubbing resistance2How surface treatment of porous copper samples dictates dry friction and wear2Development and Prospects of Oil-Based Superlubricity0Tribo-driven evolution of specific nano-heterostructures to achieve exceptional wear resistance in composites9Interfacial Diffusion and Copper Alloy Layer Wear Mechanism in Cu-20Pb-5Sn/45 Steel Bimetallic Composites1Microstructure and tribological response of a high-chromium cast iron: Role of post-normalization cooling5Microstructure and third-body behavior of Cu-MoS2-TiC composite coatings deposited by cold spray2Chemical wear of cemented carbide tools in contact with Cu-Zn alloy – investigated using thermodynamic calculations0Improving the tribological and anti-corrosion performance of LPBF-processed GH3230 superalloy by post-treatment2Fretting wear behaviour of spline materials for charging pumps in nuclear power plants0Effect of laser shock peening on microstructure and wear resistance of 1Cr17Ni3A stainless steel0Gradient-grained L12-strengthened CoCrNi-based alloy enabling self-adaptive tribolayer formation for exceptional wear resistance0Cathodic secondary phases enable protective tribocorrosion layers in magnesium alloys1Dry sliding wear resistance of a case-hardened high Cr-Co-Mo steel0Porosity matters: Exploring its impact on the unlubricated tribological behavior of copper0Enhancing high-temperature wear resistance in CoCrFeMnNi high-entropy alloy composite via Al/Ti doping and hBN/TiC dual ceramic reinforcement0Unveiling the wear mechanisms of cold-sprayed FeCoNiCrMo0.2 high-entropy alloy at elevated temperatures0

Arrows point to the paper being cited. Selecting a paper shows its incoming citations and its known path back to the original paper.

Drag to pan · Use + / − to zoom · Escape to close43 nodes / 53 citation links
Browse Matching Papers

Papers that cite this work

47 direct citing papers saved.

  1. Three regimes in the tribo-oxidation of high purity copper at temperatures of up to 150 $^\circ$C

    arXiv (Cornell University) · 2021-10-14

    Julia Rau, Schmidt, Oliver, Reinhard Schneider, Christian Greiner

    Read original paper ↗ ·

  2. Metal matrix nanocomposites in tribology: Manufacturing, performance, and mechanisms

    Friction · 2022-01-04

    Shuaihang Pan, Kaiyuan Jin, Tianlu Wang, Zhinan Zhang, Long Gen Zheng, Noritsugu Umehara

    Read original paper ↗ ·

  3. Three Regimes in the Tribo‐Oxidation of High Purity Copper at Temperatures of up to 150 °C

    Advanced Engineering Materials · 2022-06-24

    Julia Rau, Oliver Schmidt, Reinhard Schneider, Rafaela Debastiani, Christian Greiner

    Read original paper ↗ ·

  4. Heterostructured stainless steel: Properties, current trends, and future perspectives

    Materials Science and Engineering R Reports · 2022-07-18

    Liliana Romero-Resendiz, Moustafa El‐Tahawy, Tianlong Zhang, Mariana Correa Rossi, Diana Maritza Marulanda Cardona, Tao Yang, V. Amigó, Yi Huang, Hamed Mirzadeh, Irene J. Beyerlein, J.C. Huang, Terence G. Langdon, Yuntian T. Zhu

    Read original paper ↗ ·

  5. Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios

    Journal of Materials Science · 2022-09-01

    Antje Dollmann, Alexander Kauffmann, Martin Heilmaier, Aditya Srinivasan Tirunilai, Lakshmi Sravani Mantha, Christian Kübel, Stefan J. Eder, Johannes Schneider, Christian Greiner

    Read original paper ↗ ·

  6. Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions

    Friction · 2023-02-03

    Selina Raumel, Khemais Barienti, Hoang-Thien Luu, Nina Merkert, Folke Dencker, Florian Nürnberger, Hans Jürgen Maier, Marc Christopher Wurz

    Read original paper ↗ ·

  7. Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear

    Composites Part B Engineering · 2023-02-27

    Lu Yang, Chengxia Wei, Dingshan Liang, Feilong Jiang, Zhuo Cheng, Junhua Luan, Zengbao Jiao, Fuzeng Ren

    Read original paper ↗ ·

  8. A novel wear-resistant Ni-based superalloy via high Cr-induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures

    Tribology International · 2023-03-03

    Fei Liang, Ao Shu Meng, Yixing Sun, Zhaoshuo Chen, Zhaoshuo Chen, Zhouwen Jiang, Yaping Zhang, Yong Zhang, Yong Zhang, Yong Zhang, Yuntian T. Zhu, Xiang Chen

    Read original paper ↗ ·

  9. Investigations on the microstructures and tribological behaviors of as-cast CrFeCoNiCux high entropy alloys

    Intermetallics · 2023-03-24

    Qiang Wang, Qiang Hu, Hailing Wang, Liangcai Zeng

    Read original paper ↗ ·

  10. Microstructural evolution and tribological behavior of suspension plasma sprayed CuO as high-temperature lubricious coatings

    Wear · 2023-03-29

    Amit Roy, Navid Sharifi, Venkata Naga Vamsi Munagala, Sima Ahmad Alidokht, Payank Patel, Mary E. Makowiec, Richard R. Chromik, Christian Moreau, Pantcho Stoyanov

    Read original paper ↗ ·

  11. Microstructural evolution and oxidation in α/β titanium alloy under fretting fatigue loading

    Friction · 2023-04-18

    Hanqing Liu, X.H. Shao, Kai Sin Tan, Zhenjie Teng, Yaohan Du, Lang Li, Qingyuan Wang, Qiang Chen

    Read original paper ↗ ·

  12. Sequence and mechanism of early microstructure evolution in alloy 690TT subjected to fretting corrosion in high temperature pressurized water

    Corrosion Science · 2023-06-22

    W.W. Bian, Yonghao Lu, L.Z. Kang, Yongming M Han, Long Xin, Xi Liu, Tetsuo Shoji

    Read original paper ↗ ·

  13. Stress-dependent subsurface structural transformations of gradient nanograin Ti–6Al–4V alloy and its impact on wear behavior

    Journal of Materials Research and Technology · 2023-09-01

    Chenglin Wang, Yonggang Zhang, Haitao Zhang, Jiyu Liu, Zhonggang Sun, Xuesong Fu, Wenlong Zhou, Lipeng Ding, Zhihong Jia

    Read original paper ↗ ·

  14. Unraveling the Wear Mechanism of Ti(C, N)-Based Cermet Tools During High-Speed Cutting

    SSRN Electronic Journal · 2024-01-01

    Sheng-Jian Zhou, Jia‐Hu Ouyang, Xiangrui Kong, Chenguang Xu, Ying Li, Yujin Wang, Lei Chen, Yu Zhou

    Read original paper ↗ ·

  15. Sliding wear-induced compositional lamination in a VCoNi alloy at elevated temperatures, and its implications for reduced friction and wear

    Acta Materialia · 2024-07-10

    Chengxia Wei, Lu Yang, Ranxi Duan, Kangjie Chu, Fuzeng Ren

    Read original paper ↗ ·

  16. Effect of low-temperature plasma nitriding on the sliding wear behavior of 17–4PH stainless steel in high temperature water

    Materials Today Communications · 2024-08-01

    Zhongli Han, Wenhua Zhuang, Ping Lai, Jiamei Wang, Lefu Zhang, Xianglong Guo

    Read original paper ↗ ·

  17. Significantly lowering friction and wear of CoCrNi medium-entropy alloy film via massive interstitial carbon-induced amorphization

    Acta Materialia · 2024-08-15

    Qiming Zhuang, Dingshan Liang, Lu Yang, Kai Yan, Xiaofang Jiang, Junhua Luan, Zengbao Jiao, Fuzeng Ren

    Read original paper ↗ ·

  18. Cutting performance and wear mechanism of submicron and ultrafine Ti(C, N)-based cermets

    Ceramics International · 2024-08-24

    Sheng-Jian Zhou, Jia‐Hu Ouyang, Xiangrui Kong, Chen-Guang Xu, Ying Li, Yujin Wang, Lei Chen, Yu Zhou

    Read original paper ↗ ·

  19. Grain size effect on tribocorrosion kinetics in ultrahigh-purity magnesium

    Journal of Material Science and Technology · 2024-09-07

    Yue Xiang, Yaping Zhang, Yong Li, Fei Liang, Yan Lin, Chen Liu, Ming Lou, Keke Chang, Yuntian T. Zhu, Xiang Chen

    Read original paper ↗ ·

  20. New Method to Recover Activation Energy: Application to Copper Oxidation

    Metals · 2024-09-18

    Dominique Barchiesi, Thomas Grosges

    Read original paper ↗ ·

  21. The impact fretting corrosion behavior and damage mechanism of Inconel 690TT under different impact forces in high temperature pressurized water

    Corrosion Science · 2024-10-12

    W.W. Bian, Yonghao Lu, L.Z. Kang, Xuefeng Zhang, Long Xin, T. Shoji

    Read original paper ↗ ·

  22. Oxidation of a zirconium nitride multilayer-covered knee implant after two years in clinical use

    Acta Biomaterialia · 2024-10-23

    Julia Rau, Gustav Eriksson, Per Malmberg, Ana Laura Puente Reyna, Jens Schwiesau, Martin Andersson, Mattias Thuvander

    Read original paper ↗ ·

  23. A comparative study of the differences in microstructure and properties of tribo-layers of DD5 nickel-based single-crystal superalloys caused by external heat and friction heat in dry sliding wear

    Wear · 2024-12-09

    Shuai Yang, Siyang Gao, Weihai Xue, Bi Wu, Wenfeng Yu, Deli Duan

    Read original paper ↗ ·

  24. Evolution of nanocrystalline “glaze” layers and subsurface ultrafine grain layers in high-temperature sliding wear

    Friction · 2025-04-09

    Shuai Yang, Siyang Gao, Weihai Xue, Bi Wu, Deli Duan

    Read original paper ↗ ·

  25. Insights into the fretting corrosion behavior and damage mechanism of Inconel 690TT in water and steam environments containing different dissolved oxygen levels

    Corrosion Science · 2025-05-09

    W.W. Bian, X. Liu, F. Wang, Jianwei Xiao, Xuefeng Zhang, Y.Q. Han, Zhiying Cheng, T. Shoji

    Read original paper ↗ ·

  26. Wear behavior and microstructural evolution of a BCC-HCP dual-phase TiZrNbMoTa refractory high-entropy alloy at room and elevated temperatures

    Journal of Material Science and Technology · 2025-05-14

    Feilong Jiang, Lu Yang, Dingshan Liang, Jiasi Luo, Kangjie Chu, Chengxia Wei, Qiming Zhuang, Zongyuan Li, Fuzeng Ren

    Read original paper ↗ ·

  27. Oxidation of a ZrN knee implant coating under in-vitro wear simulation

    Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 2025-05-20

    Julia Rau, Gustav Eriksson, Ana Laura Puente Reyna, Jens Schwiesau, Martin Andersson, Mattias Thuvander

    Read original paper ↗ ·

  28. Achieving well-balanced mechanical and high-temperature tribological properties of Ni20Cr-based alloy via heterogeneous microstructure and oxidation regulation

    Journal of Material Science and Technology · 2025-05-29

    Chengji Liu, Shasha Yang, Minghui Chen, D.Y. Li, Fuhui Wang

    Read original paper ↗ ·

  29. Tribological behavior of novel Al–La–Mg–Mn alloy fabricated by laser powder bed fusion

    Journal of Materials Research and Technology · 2025-07-01

    Xinkui Zhang, Liejun Li, Zhenyuan Hou, Yongji Chen, Zhiwei Zou, Tao Ban, Zhuoran Li, Zhengwu Peng

    Read original paper ↗ ·

  30. Transition of Microscale Tribological Regimes from Severe Plastic Deformation to Lubricant Precipitation with Rising Temperatures

    Nano Letters · 2025-07-03

    Xin Tang, Yongxin Cheng, Kang Wang, Kaili Feng, Tianmin Shao, Aisheng Song, Tianbao Ma

    Read original paper ↗ ·

  31. Tribo-induced special nano-heterostructures to achieve ultra-high-speed rubbing resistance

    Nano Materials Science · 2025-08-01

    Shuai Yang, Siyang Gao, Weihai Xue, Bi Wu, Deli Duan

    Read original paper ↗ ·

  32. How surface treatment of porous copper samples dictates dry friction and wear

    Materials & Design · 2025-08-15

    Roxane Lung, Karl G. Schell, Christian Greiner

    Read original paper ↗ ·

  33. Development and Prospects of Oil-Based Superlubricity

    IntechOpen eBooks · 2025-08-20

    Shaonan Du, Tianyi Han, Chenhui Zhang

    Read original paper ↗ ·

  34. Tribo-driven evolution of specific nano-heterostructures to achieve exceptional wear resistance in composites

    Advanced Composites and Hybrid Materials · 2025-08-28

    Shuai Yang, Siyang Gao, Weihai Xue, Bi Wu, Deli Duan

    Read original paper ↗ ·

  35. Interfacial Diffusion and Copper Alloy Layer Wear Mechanism in Cu-20Pb-5Sn/45 Steel Bimetallic Composites

    Coatings · 2025-09-12

    Yuanyuan Kang, Guowei Zhang, Yanling Hu, Zhaoyu Li

    Read original paper ↗ ·

  36. Microstructure and tribological response of a high-chromium cast iron: Role of post-normalization cooling

    Tribology International · 2025-09-12

    Rashad Ahmed Al-Hammadi, Xipeng Tao, Rui Zhang, Zijian Zhou, Yizhou Zhou, Chuanyong Cui

    Read original paper ↗ ·

  37. Microstructure and third-body behavior of Cu-MoS2-TiC composite coatings deposited by cold spray

    Wear · 2025-12-11

    Aosong Li, Wendong Fang, Tongyue Liang, Sima Ahmad Alidokht, Phuong Vo, Bertrand Jodoin, Richard R. Chromik

    Read original paper ↗ ·

  38. Chemical wear of cemented carbide tools in contact with Cu-Zn alloy – investigated using thermodynamic calculations

    Wear · 2026-01-09

    Frida Ekholm, J. Heinrichs Lindgren, Staffan Jacobson

    Read original paper ↗ ·

  39. Improving the tribological and anti-corrosion performance of LPBF-processed GH3230 superalloy by post-treatment

    Wear · 2026-01-22

    Xiaohang Liu, Xueping Guo, Qilin Zhang, Shengbin Dai, Jiangqi Zhu, Bingwen Lu, Changri Xiong, Hao Nan Qiu, Ting Yu, Xingchen Yan

    Read original paper ↗ ·

  40. Fretting wear behaviour of spline materials for charging pumps in nuclear power plants

    Tribology International · 2026-05-04

    Q Chen, Shuai Yang, Zhichao Zhao, Linlong Li, Yinhui Che, Shengli Jiang, Deli Duan

    Read original paper ↗ ·

  41. Effect of laser shock peening on microstructure and wear resistance of 1Cr17Ni3A stainless steel

    Optics & Laser Technology · 2026-05-10

    Haofan Li, Yongxiang Geng, Haizhong Zheng, Yixin Xiao, Xin Wang, Jiacheng Lu, Xiaofang Sun

    Read original paper ↗ ·

  42. Gradient-grained L12-strengthened CoCrNi-based alloy enabling self-adaptive tribolayer formation for exceptional wear resistance

    Wear · 2026-05-16

    Lu Yang, Feilong Jiang, Zongyuan Li, Qiming Zhuang, Jiasi Luo, Dingshan Liang, Chengxia Wei, Junhua Luan, Zengbao Jiao, Fuzeng Ren

    Read original paper ↗ ·

  43. Cathodic secondary phases enable protective tribocorrosion layers in magnesium alloys

    Journal of Magnesium and Alloys · 2026-06-01

    Yue Xiang, Yaping Zhang, Yuntian Zhu, Xiang Chen

    Read original paper ↗ ·

  44. Dry sliding wear resistance of a case-hardened high Cr-Co-Mo steel

    Tribology International · 2026-07-06

    Jing Li, Lijing Zheng, Shaochen Feng, M M Liu, Huihe Liu, Fangfang Wang, Hailong Zhang, HJ Xu

    Read original paper ↗ ·

  45. Porosity matters: Exploring its impact on the unlubricated tribological behavior of copper

    Results in Surfaces and Interfaces · 2026-08-03

    Roxane Lung, Karl G. Schell, Christian Greiner

    Read original paper ↗ ·

  46. Enhancing high-temperature wear resistance in CoCrFeMnNi high-entropy alloy composite via Al/Ti doping and hBN/TiC dual ceramic reinforcement

    Wear · 2026-08-29

    Wenbo Ma, Liming Chen, Yanping Zhao, Oleksandr Тіsov, Magdalena Łępicka

    Read original paper ↗ ·

  47. Unveiling the wear mechanisms of cold-sprayed FeCoNiCrMo0.2 high-entropy alloy at elevated temperatures

    Wear · 2026-09-23

    Ningsong Fan, Wenhao Lu, Yanji Chen, Yixin Lin, Fei Liang, Yingchun Xie, Shuo Yin, Xiang Chen

    Read original paper ↗ ·
Citation Atlas · A map of research, not a ranking.