BetaCitation Atlas

RESEARCH PAPER · Materials Today · 2020

Nanostructural metallic materials: Structures and mechanical properties

Ligang Sun, Ge Wu, Qiang Wang, Jian Lü

Read original paper ↗

See where this research leads.

321 direct citing papers in this saved network. Explore the next layer with second-order citations.

Open in your workspace →Saved 2026-10-14 · complete coverage
Filter Citing Papers
Press Enter or comma to add · × to remove · searches titles and available abstracts
Journals
All journals
Most represented first · select one or more
Explore Terms In These PapersHide SuggestionsShow Suggestions

Original and current center papers stay visible as anchors.
Numbers show citations received
42 direct citing works

Nanostructural metallic materials: Structures and mechanical propertiesOriginalSegregation behavior of alloying elements at Ni Σ5 [001](210) symmetrical tilt grain boundary in nickel-based superalloys and their stabilization and strengthening mechanisms for the grain boundary33Design of Fe-based nanocrystalline alloys with superior magnetization and manufacturability206Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates103Microscopic hardness and dynamic mechanical analysis of rapidly solidified Fe-based amorphous alloys15A concurrent high strength and ductility of 3D gyroidal nanoporous metallic glasses12Constitutive modeling of size-dependent deformation behavior in nano-dual-phase glass-crystal alloys14Entropy-induced transition on grain-boundary migration in multi-principal element alloys49About metastable cellular structure in additively manufactured austenitic stainless steels528Application of Multiscale Mechanics Methods in Structural Integrity Analysis4Collective Migration of Low-Angle Tilt Boundaries Near Crack Tips in Nanocrystalline Metals under Fatigue Load0Microstructure and Strengthening Mechanisms of Nanolamellar Structures in Ultrastrong Drawn Iron Wires24Solute segregation induced stabilizing and strengthening effects on Ni Σ3 [110](111) symmetrical tilt grain boundary in nickel-based superalloys30Effect of Processing Parameters on Mechanical Properties of Deformed and Partitioned (D&P) Medium Mn Steels14Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures137Strength, plasticity, thermal stability and strain rate sensitivity of nanograined nickel with amorphous ceramic grain boundaries58A novel lean alloy of biodegradable Mg–2Zn with nanograins31Shear-strain induced structural relaxation of Cu Σ3 [110](112) symmetric tilt grain boundary: The role of foreign atoms and temperature5The tension-compression behavior of gradient structured materials: A deformation-mechanism-based strain gradient plasticity model47Atomistic investigation on the mechanical properties of 3D nanoporous metallic glasses under uniaxial tension and compression12Towards damage resistant Al2O3–SiO2 glasses with structural and chemical heterogeneities through consolidation of glassy nanoparticles16Achieving high strength and ductility in a heterogeneous-grain-structured CrCoNi alloy processed by cryorolling and subsequent short-annealing53Deep learning method for predicting the mechanical properties of aluminum alloys with small data sets52Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures189The important role of titanium microalloying in refining austenite grain of heavy‐duty H‐beam steel during rough rolling produced by a new technology2Size-dependent plasticity of hetero-structured laminates: A constitutive model considering deformation heterogeneities110TEM observation and strengthening mechanism of cementite nanoparticles of heterogeneous structure 1045 steel5Effect of primary α-Fe on soft magnetic properties of FeCuNbSiB amorphous/nanocrystalline alloy44Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy164Wear-resistance enhancement of nanostructured W-Cu-Cr composites22The Mechanical Properties and Microstructure of Nanostructured Cu with a Flexible Random Distribution of Multimodal Grain Size Prepared by a Combination of Electrodeposition and Recrystallization Annealing4A State-of-the-Art Review on Integral Transform Technique in Laser–Material Interaction: Fourier and Non-Fourier Heat Equations24Simultaneously enhancing the strength and ductility of particulate-reinforced aluminum matrix composite by aging treatment4Indentation behavior of creep-feed grinding induced gradient microstructures in single crystal nickel-based superalloy14The near-surface microstructural evolution and the influence of Si particles during nanoscratching of nanocrystalline Al14Molecular dynamics simulation on spallation of [111] Cu/Ni nano-multilayers: Voids evolution under different shock pulse duration19Achieving Low Yield Ratio in High‐Strength Steel by Tuning Multiple Microstructures6Characterization of face-centered cubic structure and deformation mechanisms in high energy shot peening process of TC1727Fracture toughness enhancement via sub‐micro silver‐precipitation in silica glass fabricated by spark plasma sintering16Mechanism of low thermal conductivity for Fe76Si13B8Nb2Cu1 amorphous and nanocrystalline alloys at room temperature13Dynamic behavior and adiabatic shearing formation of the commercially pure titanium with explosion-induced gradient microstructure31Bending compensated surface mechanical grinding treatment overcoming the strength-ductility trade-off in thin copper sheet20Controlling the mechanical properties and corrosion behavior of biomedical TiZrNb alloys by combining recrystallization and spinodal decomposition71Simultaneously achieving strength and ductility in Ni3Al nanowires with superlattice intrinsic stacking faults26Recent Progress of Synchrotron X-Ray Imaging and Diffraction on the Solidification and Deformation Behavior of Metallic Materials18Achieving gradient heterogeneous structure in Mg alloy for excellent strength-ductility synergy89Tailored tensile properties of CoCrNi medium entropy alloy by tuning the elemental distribution5Improving the mechanical properties of carbon nanotubes reinforced aluminum matrix composites by heterogeneous structural design27High strength in-situ beta reinforced Ti-based bulk metallic glass composite produced by laser Powder Bed Fusion using elemental powder mixture6Coordinated Matrix Deformation Induced Ductility in Multilayer Graphene/Aluminum Composites18Enhancement of Mechanical Properties of Commercially Pure Titanium by Shock Induced Gradient Microstructure with Martensitic Transformation1Molecular dynamics simulations of cold welding of nanoporous amorphous alloys: effects of welding conditions and microstructures18Role of In-Situ Nanocrystalline in Solidification Behaviors Manipulation, Microstructure Refinement, and Mechanical Properties Enhancement of Al-Cu4/Al-Mg1 Alloys9Establishing a quantitative relationship between strain gradient and hetero-deformation-induced stress in gradient-structured metals17High stress corrosion cracking resistance of in-situ nanoparticle strengthened steel17Combining synergetic effects of gradient nanotwins and nanoprecipitates in heterogeneous bronze alloy49A simultaneously improved strength and ductility on medium Mn TRIP steel designed by pre-twinning strategy based on SFE controlling9Strengthening mechanisms and tensile properties of 20Cr2Mn2Mo processed by laser shock peening and vacuum carbonitriding11Hard nanocrystalline gold materials prepared via high-pressure phase transformation6Hierarchical twinning governed by defective twin boundary in metallic materials125Mechanical properties of amorphous and crystalline CrN/CrAlSiN multilayer coating fabricated using HPPMS25Achieving gradient ultrafine-grained heterostructure by friction stir-assisted incremental sheet forming12Recent progress in nanocrystalline Sm–Co based magnets35Recent status and challenging perspective of high entropy oxides for chemical catalysis137Antibacterial copper-bearing titanium alloy prepared by laser powder bed fusion for superior mechanical performance62Effect of the monolayer thickness on the mechanical behavior of layered nanostructure Ni fabricated by electrodeposition3On the affected strength of Al grain boundaries by Zn segregation: A first-principles interpretation13Shock induced gradient microstructure with hierarchical nanotwins to enhance mechanical properties of Ti6Al4V alloy24Cold welding of ultrathin metallic glass nanowires with side-to-side contact using molecular dynamics simulations9Intrinsic stacking fault energy and mechanism for deformation twin formation of solid solution matrix in Ni-based superalloys32Effect of deformation twinning on microstructure refinement of Fe-38Mn alloy during friction stir processing7Heterostructured stainless steel: Properties, current trends, and future perspectives278Versatility of trace nano-TiC–TiB2 in collaborative control of solidification-rolling-welding microstructural evolution in Al–Mg–Si alloy for enhanced properties53Atomic insights into the size effect of glassy domain on the propagation of plastic deformation carriers in crystal-glass nanocomposite7An extraordinary-performance gradient nanostructured Hadfield manganese steel containing multi-phase nanocrystalline-amorphous core-shell surface layer by laser surface processing34Effect of microstructure evolution on the mechanical properties of a Mg–Y–Nd–Zr alloy with a gradient nanostructure produced via ultrasonic surface rolling processing39Electronically engineering microstructural design for developing advanced steels: An exploration of high Si bainitic steel5Tailoring phase composition of a multielement TiZrAlV alloy via electroplastic rolling4The mechanisms of grain growth of Mg alloys: A review182From patterning heterogeneity to nanoglass: A new approach to harden and toughen metallic glasses16Ultra-high strength ZrTiAl alloy fabricated by laser metal deposition and subsequent heat treatment5Effect of Surface Mechanical Pulse Treatment on Nanocrystallization and Properties of Structural Steels0Uncovering the Inherent Size Dependence of Yield Strength and Failure Mechanism in Micron-Sized Metallic Glass5Ultrastrong nanotwinned titanium alloys through additive manufacturing239Nanostructured Metals with an Excellent Synergy of Strength and Ductility: A Review12Super-strong graphene oxide-based fibers reinforced by a crystalline-amorphous superstructure33Advanced Deformation Mechanisms of Mg and Recent Developments of SPDed Mg Alloys with Excellent Mechanical Properties3Heterogeneous lamella structure design to simultaneously strengthen and toughen aluminum alloys22In-situ investigation of tension-compression asymmetry of Ni-SiOC nanocomposites5Break through the strength-ductility trade-off dilemma in aluminum matrix composites via precipitation-assisted interface tailoring204Purifying Fe-based amorphous alloys to enhance glass-forming ability by designing a novel refining slag29Compositional undulation induced strain hardening and delocalization in multi-principal element alloys26An unusual solid state amorphization in a TiZr-base bulk metallic glass composite fabricated by laser powder bed fusion6Effects of pre-existing twins on the mechanical properties of Laves phase V2Hf-based alloy7Predicting gradient mechanical behaviour of a shot-peened structure8A novel maraging stainless steel ultra-high-strengthened by multi-nanoprecipitations57Enhancement of mechanical properties of tungsten alloy via disordered microstructure and solid solution strengthening14Effect of biaxial strain on grain growth in nanocrystalline films: Coupling between grain-boundary energy and strain energy15Cell delivery devices for cancer immunotherapy12Enhancement of mechanical properties of commercially pure titanium by shock induced gradient microstructure with martensitic transformation17Microstructure Evolution and Formation of Gradient Structures in Single Crystal Nickel-Based Superalloy by Surface Mechanical Creep-Feed Grinding Treatment7Electrochemical Deposition Toward Thin Films17Review on bainite phase transformation and mechanism in CMnSi steel3L-tyrosine-assisted synthesis of nanosilver/titanium nitride with hollow microsphere structure for electrochemical detection of hydrogen peroxide6Mechanical properties of Al-Si matrix composites synergistically reinforced by high-entropy alloy and SiC nanoparticles17Synergistic Strengthening of Dislocation and Heterodeformation Induced in Gradient Nanograined Copper Film: A Molecular Dynamics Study11Layer thickness dependent plastic deformation mechanism in Ti/TiCu dual-phase nano-laminates4A medium-C martensite steel with 2.6 GPa tensile strength and large ductility32Dispersed strain bands promote the ductility of gradient nano-grained material: A strain gradient constitutive modeling considering damage effect13Nanoindentation and nanotribology behaviors of open-cell metallic glass nanofoams54Transformation of dislocation strengthening mechanisms induced by graphene nanoplates and ZrB2 nanoparticle in nanolaminated Al matrix composites33Untra-fine-grained equiatomic CoCrNi medium entropy alloys with high density stacking faults and strengthening mechanisms25Chemical Inhomogeneity from the Atomic to the Macroscale in Multi-Principal Element Alloys: A Review of Mechanical Properties and Deformation Mechanisms12Artificial Neural Network for the Prediction of Fatigue Life of Microscale Single-Crystal Copper6The thermal instability mechanism and annealed deformation behavior of Cu/Nb nanolaminate composites26Unveiling load carriers between nanoparticles capable of passing through a glassy disordered phase: A theoretical multiscale analysis8Experimental validation and thermodynamics analysis of (Nb, V)(C, N) coupling precipitation in high-strength spring steel FAS35504Integrated modeling of the gradient structure evolution during surface mechanical grinding treatment: Formation mechanism and mechanical properties27Effect of ultrasonic surface rolling process on microstructure and properties of rolled Mg-Y-Nd-Zr alloy13In situ observation of the pseudoelasticity of twin boundary6Variation of BCC/B2 coherent microstructure and resultant improvement in strength of Al0.7CrxFe3−xCoNi high-entropy alloys16Extraordinary superplasticity at low homologous temperature and high strain rate enabled by a multiphase nanocrystalline network31Martensite decomposition under thermal-mechanical coupling conditions to fabricate an ultrafine-grained Ti6Al4Mo4Zr1W0.2Si alloy12Revealing the toughening mechanisms in graphene/tungsten nanocomposites with hierarchical nacre-like structures15Beyond Orowan hardening: Mapping the four distinct mechanisms associated with dislocation-precipitate interaction154Stable strain hardening behavior of Ti-4Al-5Mo-5V-5Cr-1Nb alloy during plastic deformation0Elevating strength–ductility synergy in aluminum matrix composites by multiscale and dual-structured reinforcing particulates8Hierarchical crystalline–amorphous nanocomposites with high strength and large deformability enabled by elemental diffusion15Reviewing the Integrated Design Approach for Augmenting Strength and Toughness at Macro- and Micro-Scale in High-Performance Advanced Composites57Gradient network architecture design induced strain delocalization and delayed failure in metallic glass matrix composites5Laser additively manufactured crack-free aluminum-bearing high entropy alloys: alloy design, synthesis, cracking inhibition and microstructure evolution effects on their tensile properties21Anisotropic mechanical properties and deformation mechanisms of nanotwinned Ni and Ni alloys with extremely fine twin boundary spacings30Passivation properties of ultrafine grain 316L stainless steels manufactured by ball milling and spark plasma sintering11Dimension-dependent mechanical features of Au-nanocrystalline nanofilms4Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys9Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering55The significant role of bimodal lamellar heterostructure for Lüders deformation and TRIP effect in 18Cr–8Ni austenitic stainless steel22Recent progress in gradient-structured metals and alloys313Imaging of atomic stress at grain boundaries based on machine learning23Grain boundary segregation behavior of Mo atoms in nanocrystalline Ni–Mo alloy4Preparation and magnetic properties of high DC-bias performance Fe-Si-Nb-B-Cu/carbonyl iron chip inductors11Polysaccharide nanocomposites in wastewater treatment: A review71Design strategies for enhancing strength and toughness in high performance metal matrix composites: A review49Recent Advances in W–Cu Composites: A Review on the Fabrication, Application, Property, Densification, and Strengthening Mechanism36Multiple shearing induced in one-step deformation fabricating gradient-structured aluminium disks4Amorphous Thickness-Dependent Strengthening–Softening Transition in Crystalline–Amorphous Nanocomposites42Temperature effect on the transition between grain boundary migration and sliding0Inverse gradient nanostructure through gradient cold rolling demonstrated with superelasticity improvement in Ti-50.3Ni shape memory alloy23Surface gradient structures in single-crystal nickel alloy induced by ultrasonic-assisted high-speed grinding8Investigation of Mechanical Properties and Microstructural Evolution of Gradient Nanostructured 310s Stainless Steel Using the Thin Shell Removal Method0Investigation of Size Effects on Spall Damage Behavior in Polycrystalline Aluminum During High Impact0

Arrows point to the paper being cited. Selecting a paper shows its incoming citations and its known path back to the original paper.

Drag to pan · Use + / − to zoom · Escape to close43 nodes / 53 citation links
Browse Matching Papers

Papers that cite this work

321 direct citing papers saved. Showing the first 50 here; use Browse Matching Papers in the map for all loaded papers.

  1. Segregation behavior of alloying elements at Ni Σ5 [001](210) symmetrical tilt grain boundary in nickel-based superalloys and their stabilization and strengthening mechanisms for the grain boundary

    Materials Chemistry and Physics · 2020-10-24

    Hongtao Xue, Ya-Qiao Luo, Fuling Tang, Xuefeng Lu, Junqiang Ren

    Read original paper ↗ ·

  2. Design of Fe-based nanocrystalline alloys with superior magnetization and manufacturability

    Materials Today · 2020-11-06

    Hu Li, Anding Wang, Tao Liu, Pingbo Chen, Aina He, Qiang Li, Junhua Luan, Chain-Tsuan Liu

    Read original paper ↗ ·

  3. Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates

    Composites Part B Engineering · 2020-11-21

    Xuezheng Zhang, Tijun Chen, Siming Ma, He Yong Qin, Jinyuan Ma

    Read original paper ↗ ·

  4. Microscopic hardness and dynamic mechanical analysis of rapidly solidified Fe-based amorphous alloys

    Journal of Alloys and Compounds · 2020-11-23

    P.C. Zhang, Yanlang Hu, Jian Chang, Haipeng Wang

    Read original paper ↗ ·

  5. A concurrent high strength and ductility of 3D gyroidal nanoporous metallic glasses

    Journal of Non-Crystalline Solids · 2020-12-03

    Jiejie Li, Xiaodan Hu, Yuhang Zhang, Chenyao Tian, Guoming Hu, Sheng Liu, Re Xia

    Read original paper ↗ ·

  6. Constitutive modeling of size-dependent deformation behavior in nano-dual-phase glass-crystal alloys

    International Journal of Plasticity · 2020-12-18

    Linli Zhu, Haihui Ruan, Ligang Sun, Xiang Guo, Jian Lü

    Read original paper ↗ ·

  7. Entropy-induced transition on grain-boundary migration in multi-principal element alloys

    Scripta Materialia · 2020-12-21

    Fusheng Tan, Jia Li, Hui Feng, Qihong Fang, Chao Jiang, Yong Liu, Peter Kaehuei Liaw

    Read original paper ↗ ·

  8. About metastable cellular structure in additively manufactured austenitic stainless steels

    Additive manufacturing · 2020-12-23

    Decheng Kong, Chaofang Dong, Shaolou Wei, Xiaoqing Ni, Liang Zhang, Ruixue Li, Li Wang, Cheng Man, Xiaogang Li

    Read original paper ↗ ·

  9. Application of Multiscale Mechanics Methods in Structural Integrity Analysis

    Journal of Mechanical Engineering · 2021-01-01

    Sun Ligang, Chao Ling, Hao Chen, Dongfeng Li

    Read original paper ↗ ·

  10. Collective Migration of Low-Angle Tilt Boundaries Near Crack Tips in Nanocrystalline Metals under Fatigue Load

    Reviews on advanced materials and technologies · 2021-01-01

    Yaroslav V. Konakov, A. G. Sheĭnerman

    Read original paper ↗ ·

  11. Microstructure and Strengthening Mechanisms of Nanolamellar Structures in Ultrastrong Drawn Iron Wires

    Scripta Materialia · 2021-01-01

    Hanchen Feng, Linfeng Wang, Shiyun Cui, Niels Hansen, Feng Fang, Xiaodan Zhang

    Read original paper ↗ ·

  12. Solute segregation induced stabilizing and strengthening effects on Ni Σ3 [110](111) symmetrical tilt grain boundary in nickel-based superalloys

    Journal of Materials Research and Technology · 2021-01-27

    Hongtao Xue, Ya-Qiao Luo, Fuling Tang, Xue‐Feng Yu, Xuefeng Lu, Junqiang Ren

    Read original paper ↗ ·

  13. Effect of Processing Parameters on Mechanical Properties of Deformed and Partitioned (D&P) Medium Mn Steels

    Metals · 2021-02-20

    Chengpeng Huang, Mingxin Huang

    Read original paper ↗ ·

  14. Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

    Applied Materials Today · 2021-04-16

    Wanpeng Li, Tzu Hsiu Chou, Tao Yang, Wen-Shuo Chuang, Jacob C. Huang, Junhua Luan, Xiangkai Zhang, Xiaofeng Huo, Haojie Kong, Quanfeng He, Xinghao Du, C.T. Liu, Fu‐Rong Chen

    Read original paper ↗ ·

  15. Strength, plasticity, thermal stability and strain rate sensitivity of nanograined nickel with amorphous ceramic grain boundaries

    Acta Materialia · 2021-04-22

    Bingqiang Wei, Wenqian Wu, Dongyue Xie, M. Nastasi, Jian Wang

    Read original paper ↗ ·

  16. A novel lean alloy of biodegradable Mg–2Zn with nanograins

    Bioactive Materials · 2021-04-30

    Wenhui Wang, Carsten Blawert, Rui Zan, Yu Sun, Hongzhou Peng, Jiahua Ni, Pei Han, Tao Suo, Yang Song, Shaoxiang Zhang, Mikhail L. Zheludkevich, Xiaonong Zhang

    Read original paper ↗ ·

  17. Shear-strain induced structural relaxation of Cu Σ3 [110](112) symmetric tilt grain boundary: The role of foreign atoms and temperature

    Current Applied Physics · 2021-05-04

    Yang Li, Hongtao Xue, Xin Zhou, Fuling Tang, Xiuyan Li, Junqiang Ren, Xuefeng Lu

    Read original paper ↗ ·

  18. The tension-compression behavior of gradient structured materials: A deformation-mechanism-based strain gradient plasticity model

    Mechanics of Materials · 2021-05-13

    Jianfeng Zhao, Xiaochong Lü, Jinling Liu, Chen Bao, Guozheng Kang, Michael Zaiser, Xu Zhang

    Read original paper ↗ ·

  19. Atomistic investigation on the mechanical properties of 3D nanoporous metallic glasses under uniaxial tension and compression

    Materials Today Communications · 2021-05-19

    Yuhang Zhang, Yuehui Xian, Jiejie Li, Suhang Ding, Sheng Liu, Re Xia

    Read original paper ↗ ·

  20. Towards damage resistant Al2O3–SiO2 glasses with structural and chemical heterogeneities through consolidation of glassy nanoparticles

    Acta Materialia · 2021-05-27

    Yanming Zhang, Liping Huang, Yunfeng Shi

    Read original paper ↗ ·

  21. Achieving high strength and ductility in a heterogeneous-grain-structured CrCoNi alloy processed by cryorolling and subsequent short-annealing

    Materials Science and Engineering A · 2021-06-19

    Xiaoyan Zheng, Weibin Xie, Longfei Zeng, Haigen Wei, Xuihui Zhang, Hang Wang

    Read original paper ↗ ·

  22. Deep learning method for predicting the mechanical properties of aluminum alloys with small data sets

    Materials Today Communications · 2021-06-19

    Zhang Yu, Ye Sang, Yanli Sun, Hucheng Zhao, Xi‐Qiao Feng

    Read original paper ↗ ·

  23. Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures

    International Journal of Machine Tools and Manufacture · 2021-06-23

    Chaolin Tan, Ji Zou, Sheng Li, Parastoo Jamshidi, Alessandro Abena, Alexander N. Forsey, Richard James Moat, Khamis Essa, Minshi Wang, Kesong Zhou, Moataz M. Attallah

    Read original paper ↗ ·

  24. The important role of titanium microalloying in refining austenite grain of heavy‐duty H‐beam steel during rough rolling produced by a new technology

    Materialwissenschaft und Werkstofftechnik · 2021-07-01

    Yongqiang Wang, Jihua Li, F. Li, Zhangqi Ge, J. Xing, Na Li, Guohui Zhu, Hanlin Ding, Q. Chen

    Read original paper ↗ ·

  25. Size-dependent plasticity of hetero-structured laminates: A constitutive model considering deformation heterogeneities

    International Journal of Plasticity · 2021-07-03

    Jianfeng Zhao, Michael Zaiser, Xiaochong Lü, Bo Zhang, Chongxiang Huang, Guozheng Kang, Xu Zhang

    Read original paper ↗ ·

  26. TEM observation and strengthening mechanism of cementite nanoparticles of heterogeneous structure 1045 steel

    Materials Research Express · 2021-07-14

    Zhengning Li, Peiqing La, Fuan Wei

    Read original paper ↗ ·

  27. Effect of primary α-Fe on soft magnetic properties of FeCuNbSiB amorphous/nanocrystalline alloy

    Journal of Non-Crystalline Solids · 2021-07-29

    Jili Ding, Hongjie Xu, Zhiguang Shi, Xuan Li, Tao Zhang

    Read original paper ↗ ·

  28. Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy

    International Journal of Extreme Manufacturing · 2021-08-16

    Qing Miao, Wenfeng Ding, Jiuhua Xu, Lijie Cao, Hongcai Wang, Zhen Yin, Chenwei Dai, Weijie Kuang

    Read original paper ↗ ·

  29. Wear-resistance enhancement of nanostructured W-Cu-Cr composites

    International Journal of Refractory Metals and Hard Materials · 2021-08-18

    Lijun Cao, Chao Ran Hou, Fawei Tang, Tielong Han, Xintao Huang, Yurong Li, Gaochao Wu, Chao Liu, Shuhua Liang, Junhua Luan, Zengbao Jiao, Zuoren Nie, Xiaoyan Song

    Read original paper ↗ ·

  30. The Mechanical Properties and Microstructure of Nanostructured Cu with a Flexible Random Distribution of Multimodal Grain Size Prepared by a Combination of Electrodeposition and Recrystallization Annealing

    Journal of Materials Engineering and Performance · 2021-08-19

    Linbo Liu, Xixun Shen, Chengwei Deng, Tao Wang, Hong Yun, Qunjie Xu

    Read original paper ↗ ·

  31. A State-of-the-Art Review on Integral Transform Technique in Laser–Material Interaction: Fourier and Non-Fourier Heat Equations

    Materials · 2021-08-22

    Mihai Oane, Muhammad Arif Mahmood, Andrei C. Popescu

    Read original paper ↗ ·

  32. Simultaneously enhancing the strength and ductility of particulate-reinforced aluminum matrix composite by aging treatment

    Journal of materials research/Pratt's guide to venture capital sources · 2021-09-14

    Xuezheng Zhang, Tijun Chen

    Read original paper ↗ ·

  33. Indentation behavior of creep-feed grinding induced gradient microstructures in single crystal nickel-based superalloy

    Materials Letters · 2021-09-28

    Qing Miao, Wenfeng Ding, Weijie Kuang, Yucan Fu, Zhen Yin, Chenwei Dai, Lijie Cao, Hongcai Wang

    Read original paper ↗ ·

  34. The near-surface microstructural evolution and the influence of Si particles during nanoscratching of nanocrystalline Al

    Applied Surface Science · 2021-10-09

    Xing Wen Luo, Zhibo Zhang, Lijia Chen, Yongnan Xiong, Yao Shu, Jiazhen He, Cuicui Yin

    Read original paper ↗ ·

  35. Molecular dynamics simulation on spallation of [111] Cu/Ni nano-multilayers: Voids evolution under different shock pulse duration

    Computational Materials Science · 2021-10-14

    Youlin Zhu, Jianian Hu, Shanglin Huang, Junjie Wang, Guoqiang Luo, Qiang Shen

    Read original paper ↗ ·

  36. Achieving Low Yield Ratio in High‐Strength Steel by Tuning Multiple Microstructures

    steel research international · 2021-10-20

    Rongjian Shi, Tengfei Wang, Kewei Gao, Zidong Wang, Lijie J. Qiao, Xiaolu Pang

    Read original paper ↗ ·

  37. Characterization of face-centered cubic structure and deformation mechanisms in high energy shot peening process of TC17

    Journal of Material Science and Technology · 2021-11-09

    Chao Yang, M.Q. Li, Yingang Liu

    Read original paper ↗ ·

  38. Fracture toughness enhancement via sub‐micro silver‐precipitation in silica glass fabricated by spark plasma sintering

    Journal of the American Ceramic Society · 2021-11-09

    Lei Liu, Kenji Shinozaki

    Read original paper ↗ ·

  39. Mechanism of low thermal conductivity for Fe76Si13B8Nb2Cu1 amorphous and nanocrystalline alloys at room temperature

    Journal of Non-Crystalline Solids · 2021-11-11

    Yan Ma, Weiming Yang, Jun Pei, Hongyang Li, Hao Lü, Haishun Liu, Ming Li, Wenyu Li, Xinfa Sun, Jiawei Li, Akihisa Inoue

    Read original paper ↗ ·

  40. Dynamic behavior and adiabatic shearing formation of the commercially pure titanium with explosion-induced gradient microstructure

    Materials Science and Engineering A · 2021-11-17

    Yansong Guo, Rui Liu, Ali Arab, Qiang Zhou, Baoqiao Guo, Yeping Ren, Wen Chen, Chun Ran, Pengwan Chen

    Read original paper ↗ ·

  41. Bending compensated surface mechanical grinding treatment overcoming the strength-ductility trade-off in thin copper sheet

    Materials Science and Engineering A · 2021-11-24

    K. L. Han, Xiaoqiang Li, Xiaochun Liu, Yong Li, Dong‐Sheng Li

    Read original paper ↗ ·

  42. Controlling the mechanical properties and corrosion behavior of biomedical TiZrNb alloys by combining recrystallization and spinodal decomposition

    Journal of Material Science and Technology · 2021-11-26

    Pengfei Ji, Bohan Chen, Shuguang Liu, Bo Li, Chaoqun Xia, Xinyu Zhang, Mingzhen Ma, Riping Liu

    Read original paper ↗ ·

  43. Simultaneously achieving strength and ductility in Ni3Al nanowires with superlattice intrinsic stacking faults

    International Journal of Mechanical Sciences · 2021-11-26

    Zhiwei Zhang, Qiang Fu, Jun Wang, Rong Yang, Pan Xiao, Fujiu Ke, Chunsheng Lu

    Read original paper ↗ ·

  44. Recent Progress of Synchrotron X-Ray Imaging and Diffraction on the Solidification and Deformation Behavior of Metallic Materials

    Acta Metallurgica Sinica (English Letters) · 2021-12-02

    Youhong Peng, Kesong Miao, Wei Sun, Chenglu Liu, Hao Wu, Lin Geng, Guohua Fan

    Read original paper ↗ ·

  45. Achieving gradient heterogeneous structure in Mg alloy for excellent strength-ductility synergy

    Journal of Magnesium and Alloys · 2021-12-06

    Jing Light Han, Jiapeng Sun, Yuanming Song, Bingqian Xu, Zhenquan Yang, Songsong Xu, Ying Han, Guosong Wu, Jiyun Zhao

    Read original paper ↗ ·

  46. Tailored tensile properties of CoCrNi medium entropy alloy by tuning the elemental distribution

    Journal of Alloys and Compounds · 2021-12-09

    Jiaqi Zhu, Ligang Sun, Zhiwu Bie, Xiaobao Tian, Xiaoqiao He

    Read original paper ↗ ·

  47. Improving the mechanical properties of carbon nanotubes reinforced aluminum matrix composites by heterogeneous structural design

    Composites Communications · 2021-12-24

    Z.Y. Xu, Caiju Li, Peng Gao, X. You, Rui Bao, Dong Fang, Jingmei Tao, Jianhong Yi

    Read original paper ↗ ·

  48. High strength in-situ beta reinforced Ti-based bulk metallic glass composite produced by laser Powder Bed Fusion using elemental powder mixture

    Materials Science and Engineering A · 2021-12-29

    Quanxin Yan, Jun Yu, Xin Lin, M.J. Dang, Shu-Yan Shi, Y.F. Zhang, Weidong Huang

    Read original paper ↗ ·

  49. Coordinated Matrix Deformation Induced Ductility in Multilayer Graphene/Aluminum Composites

    Carbon · 2022-01-01

    Boyu Ju, Zhenhe Yu, Huasong Gou, Wenshu Yang, Guoqin Chen, Gaohui Wu

    Read original paper ↗ ·

  50. Enhancement of Mechanical Properties of Commercially Pure Titanium by Shock Induced Gradient Microstructure with Martensitic Transformation

    SSRN Electronic Journal · 2022-01-01

    Yansong Guo, Bin Jia, Qiang Zhou, Wen Chen, Yeping Ren, Qiang Zhou, Rui Liu, Ali Arab, Chun Ran, Pengwan Chen

    Read original paper ↗ ·
More citing papers →
Citation Atlas · A map of research, not a ranking.