BetaCitation Atlas
← Back to paper and map

Papers citing In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

  1. The synthesis of 1.13 nm tobermorite from carbonated opoka

    Journal of Thermal Analysis and Calorimetry · 2018-06-04

    G. Smalakys, Raimundas Šiaučiūnas

    Read original paper ↗ ·
  2. Synthesis of Tobermorite Structure with Non-traditional Silica Components

    International Journal on Advanced Science Engineering and Information Technology · 2018-06-26

    Vít Černý, Ján Fleischhacker, Magdaléna Kociánová, Rostislav Drochytka

    Read original paper ↗ ·
  3. Microstructure and Shrinkage Behavior of Autoclaved Aerated Con-crete(AAC) -Comparison of Vietnamese and Japanese AACs-

    Journal of Advanced Concrete Technology · 2018-08-17

    Nguyen Trong Lam, Shingo Asamoto, Kunio Matsui

    Read original paper ↗ ·
  4. Influence of gypsum and limestone, used as mineral additives, on autoclaved aerated concrete properties

    ce/papers · 2018-09-01

    Marek Małecki, Wieslaw Kurdowski, Paweł Walczak

    Read original paper ↗ ·
  5. Innovations in the crystalline structure forming and its effects on the mechanical performance of AAC

    ce/papers · 2018-09-01

    Taner Kavas, Aidong Tan, Utku Tiriç, Abdullatif Durgun

    Read original paper ↗ ·
  6. Length change behavior of autoclaved aerated concrete at various relative humidity: Comparison between Japanese and Vietnamese AACs

    ce/papers · 2018-09-01

    Nguyen Trong Lam, Shingo Asamoto, Kunio Matsui

    Read original paper ↗ ·
  7. Sorption isotherm and length change behavior of autoclaved aerated concrete

    Cement and Concrete Composites · 2018-09-07

    Nguyen Trong Lam, Shingo Asamoto, Kunio Matsui

    Read original paper ↗ ·
  8. Influence of Silica Fume Source on Crystallization of Xonotlite in a New Process Making Medium Density Ca-Silicate Based Products

    Key engineering materials · 2018-11-01

    Felipe Martí Montava, Ann Opsommer, David García Sanoguera

    Read original paper ↗ ·
  9. Study of K-Feldspar and Lime Hydrothermal Reaction: Phase and Mechanism with Reaction Temperature and Increasing Ca/Si Ratio

    Minerals · 2019-01-14

    Shanke Liu, Cheng Han, Jianming Liu

    Read original paper ↗ ·
  10. Advanced Rietveld refinement and SEM analysis of tobermorite in chemically diverse autoclaved aerated concrete

    Powder Diffraction · 2019-03-11

    Juergen Schreiner, Friedlinde Goetz‐Neunhoeffer, Juergen Neubauer, S. Volkmann, Sebastian T. Bergold, R. Webler, Daniel C. Jansen

    Read original paper ↗ ·
  11. Study on Strength and Characteristics of Cement Paste for Well Exposed to 200 °C

    Journal of the Society of Materials Science Japan · 2019-06-15

    Shingo Asamoto, Miharu Tsukahara, Takayasu ITOH, Kunio Matsui

    Read original paper ↗ ·
  12. Hydrothermal reaction products of brick recyclates

    IOP Conference Series Materials Science and Engineering · 2019-07-01

    Jakub Palovčík, Tomáš Opravil, František Šoukal, Jiří Másilko

    Read original paper ↗ ·
  13. Preparation and properties of waste-solid based foam concrete energy-saving materials

    IOP Conference Series Earth and Environmental Science · 2019-07-01

    Jun Hui Ji, Xiaosheng Liu, Shengying Tan, Wen Ni

    Read original paper ↗ ·
  14. Stabilization of the ammonia in SNCR fly ash - the influence of tannins presence on the preparation of an autoclaved aerated concrete

    IOP Conference Series Materials Science and Engineering · 2019-07-01

    Lucie Galvánková, Matěj Lédl, Denisa Beranová, Tomáš Opravil

    Read original paper ↗ ·
  15. Evaluation of Autoclaved Aerated Concrete Fines for Removal of Cd(II) and Pb(II) from Wastewater

    Journal of Environmental Engineering · 2019-08-29

    G. M. P. Kumara, Ken Kawamoto, Takeshi Saito, Shoichiro Hamamoto, Shingo Asamoto

    Read original paper ↗ ·
  16. Influence of fluidized bed combustion fly ash admixture on hydrothermal synthesis of tobermorite in the mixture with quartz sand, high temperature fly ash and lime

    Construction and Building Materials · 2019-09-27

    Rostislav Drochytka, Vít Černý

    Read original paper ↗ ·
  17. The influence of the fireclay waste on the microstructure and the physico-mechanical properties of autoclaved aerated concrete

    Modern building materials, structures and techniques · 2019-12-03

    Pavlína Šebestová, Vít Černý, Rostislav Drochytka

    Read original paper ↗ ·
  18. Alkali-reinforced hydrothermal synthesis of lathy tobermorite fibers using mixture of coal fly ash and lime

    Construction and Building Materials · 2019-12-09

    Pengxu Cao, Guanghui Li, Jun Luo, Mingjun Rao, Hao Jiang, Zhiwei Peng, Tao Jiang

    Read original paper ↗ ·
  19. Investigation of the Influence of Residue Fluid Catalytic Cracking (FCC) on Properties of Autoclaved Aerated Concrete

    Lecture notes in civil engineering · 2020-01-01

    Anh Tuấn Lê, Khoa Vo Anh Pham, Ninh Thuy Nguyen, Chorong Lee, Kihak Lee

    Read original paper ↗ ·
  20. Effect of alkali on the synthesis of single phase gyrolite in the system CaO-quartz-H2O

    Construction and Building Materials · 2020-01-13

    Agnieszka Różycka, Łukasz Kotwica

    Read original paper ↗ ·
  21. Síntese de material de valor agregado a partir de coproduto da combustão de carvão: caracterização e aplicação na remediação de efluente aquoso

    Unknown journal · 2020-01-21

    Lucas Caetano Grosche

    Read original paper ↗ ·
  22. Synthesis of Al-substituted 11Å tobermorite using waste glass cullet: A study on the microstructure

    Materials Chemistry and Physics · 2020-04-16

    Alireza Majdinasab, Qiuyan Yuan

    Read original paper ↗ ·
  23. In situ monitoring of hydrothermal reactions by X-ray diffraction with Bragg–Brentano geometry

    Journal of Applied Crystallography · 2020-06-18

    Karsten Mesecke, Winfried Malorny, Laurence Noel Warr

    Read original paper ↗ ·
  24. Recycling of Basic Oxygen Furnace Slag as a Raw Material for Autoclaved Aerated Concrete Production

    Sustainability · 2020-07-22

    Ying‐Liang Chen, Chun-Ta Lin

    Read original paper ↗ ·
  25. Microstructure and properties of fly ash/cement-based pastes activated with MgO and CaO under hydrothermal conditions

    Cement and Concrete Composites · 2020-07-26

    Zhiguang Zhao, Xiaoling Qu, Jinhe Li

    Read original paper ↗ ·
  26. Preparation of porous silica powder via selective acid leaching of calcined tobermorite

    Powder Technology · 2020-08-04

    Qinyi Zhao, Tong Li, Chong Cui, Zhizeng Wang, Xifeng Ding, Shihua Zhang

    Read original paper ↗ ·
  27. Production of autoclaved aerated concrete with silica raw materials of a higher solubility than quartz part I: Influence of calcined diatomaceous earth

    Construction and Building Materials · 2020-12-23

    Taban Shams, Georg Schober, Detlef Heinz, Severin Seifert

    Read original paper ↗ ·
  28. Thermal and hydrothermal treatment of UHPC: influence of the process parameters on the phase composition of ultra-high performance concrete

    Materials and Structures · 2021-02-01

    Julia von Werder, Sebastian Simon, André Gardei, Patrick Fontana, Birgit Meng

    Read original paper ↗ ·
  29. Effect of ZSM-5 waste dosage on the properties of autoclaved aerated concrete

    Construction and Building Materials · 2021-02-05

    Jun Jiang, Qiang Cai, Bing Ma, Yueyang Hu, Binbin Qian, Fei Ma, Zhiyuan Shao, Zifang Xu, Luming Wang

    Read original paper ↗ ·
  30. Synthesis of value-added zeolites and tobermorite from waste glass cullet using conventional and microwave-assisted hydrothermal treatments

    Mspace (University of Manitoba) · 2021-02-26

    Alireza Majdinasab

    Read original paper ↗ ·
  31. Production of autoclaved aerated concrete with silica raw materials of a higher solubility than quartz Part II: Influence of autoclaving temperature

    Construction and Building Materials · 2021-03-26

    Taban Shams, Georg Schober, Detlef Heinz, Severin Seifert

    Read original paper ↗ ·
  32. Detoxified Spent Pot Lining from Aluminum Production as (Alumino-)Silicate Source for Composite Cement and AutoClaved Aerated Concrete

    Applied Sciences · 2021-04-20

    Arne Peys, Mateja Košir, Ruben Snellings, Ana Mladenovič, Liesbeth Horckmans

    Read original paper ↗ ·
  33. Effect of Ca–Si–Al Element Proportion on the Formation of Aluminosilicate Minerals and Detoxification of PAHs in Fly Ash from MSW Incineration during the Hydrothermal Process

    Energy & Fuels · 2021-05-17

    Dezhi Shi, Haihang Tong, Mengying Lv, Hanbo Zhang, Hailin Wang, Ling Luo, Jingyuan Ma, Cailing Ma, Dan Luo, Xuhuan Zhao, Zhiyong Han

    Read original paper ↗ ·
  34. Utilization of ZSM-5 waste for the preparation of autoclaved aerated concrete (AAC): Mechanical properties and reaction products

    Construction and Building Materials · 2021-06-08

    Jun Jiang, Bing Ma, Qiang Cai, Zhiyuan Shao, Yueyang Hu, Binbin Qian, Jiaqing Wang, Fei Ma, Luming Wang

    Read original paper ↗ ·
  35. Influence of foreign ions on calcium silicate hydrate under hydrothermal conditions: A review

    Construction and Building Materials · 2021-07-02

    Hongwei Tian, Dietmar A. Stephan, Barbara Lothenbach, C.W. Lehmann

    Read original paper ↗ ·
  36. Density Functional Tight-Binding Simulations Reveal the Presence of Surface Defects on the Quartz (101)–Water Interface

    The Journal of Physical Chemistry C · 2021-07-09

    Ke Yuan, Nikhil Rampal, Paul Fenter, James D. Kubicki, Andrew G. Stack, Stephan Irle

    Read original paper ↗ ·
  37. In situ scattering studies of material formation during wet-chemical syntheses

    Elsevier eBooks · 2021-08-04

    Susanne Linn Skjærvø, Mikkel Juelsholt, Kirsten M. Ø. Jensen

    Read original paper ↗ ·
  38. Design, fabrication, and characterization of distinguished lightweight and sustainable building materials

    Journal of Building Engineering · 2021-12-01

    Ahmed Tawfik, R.A. Abd-El-Razik

    Read original paper ↗ ·
  39. Comparative microstructures and mechanical properties of mortar incorporating wood fiber waste from various curing conditions

    Case Studies in Construction Materials · 2021-12-23

    Kittipong Kunchariyakun, Suthatip Sinyoung, Puangrat Kajitvichyanukul

    Read original paper ↗ ·
  40. Investigation of Phase Formation, Microstructure and Mechanical Properties of Lc3 Based Autoclaved Aerated Blocks

    Construction and Building Materials · 2022-01-01

    G.V.P. Bhagath Singh, Karen Louise Scrivener

    Read original paper ↗ ·
  41. Preparation and characterization of waterproof autoclaved aerated concrete using molybdenum tailings as the raw materials

    Journal of Building Engineering · 2022-01-13

    Chuanlong Shan, Zanzhong Yang, Zhen Su, Ramachandran Rajan, Xuexia Zhou, Lu Wang

    Read original paper ↗ ·
  42. Structure modeling and quantitative X-ray diffraction of C-(A)-S-H

    Journal of Applied Crystallography · 2022-01-24

    Karsten Mesecke, Laurence Noel Warr, Winfried Malorny

    Read original paper ↗ ·
  43. The Influence of Long-Term Autoclaving on the Properties of Ultra-High Performance Concrete

    Frontiers in Materials · 2022-03-04

    Hongwei Tian, Tamino Hirsch, Dietmar A. Stephan, C.W. Lehmann

    Read original paper ↗ ·
  44. Influence of Industrial Metakaolin Waste on Autoclaved Fiber Cement Properties Changes in Standard Fire Environment

    Materials · 2022-05-11

    Tomaš Veliseičik, Ramunė Žurauskienė, Modestas Kligys, Mark Dauksevic

    Read original paper ↗ ·
  45. Rice husk ash as a silica source for the production of autoclaved aerated concrete – A chance to save energy and primary resources

    Journal of Building Engineering · 2022-06-16

    Taban Shams, Georg Schober, Detlef Heinz, Severin Seifert

    Read original paper ↗ ·
  46. Solubility and characterization of synthesized 11 Å Al-tobermorite

    Cement and Concrete Research · 2022-06-16

    Barbara Lothenbach, Daniel C. Jansen, Yiru Yan, Juergen Schreiner

    Read original paper ↗ ·
  47. Possibility to Optimize Hydrothermal Conditions for the Production of Autoclaved Aerated Concrete Using Rice Husk Ash as the Silica Raw Material

    Lecture notes in civil engineering · 2022-07-12

    Taban Shams, Georg Schober, Detlef Heinz, Severin Seifert

    Read original paper ↗ ·
  48. Performance Investigation of the Incorporation of Ground Granulated Blast Furnace Slag with Fly Ash in Autoclaved Aerated Concrete

    Crystals · 2022-07-23

    Vijay Antony Raj Bernard, Senthil Muthalvan Renuka, Siva Avudaiappan, Chockkalingam Umarani, Mugahed Amran, Pablo Guindos, Роман Сергеевич Федюк, Nikolai Ivanovich Vatin

    Read original paper ↗ ·
  49. Al uptake in calcium silicate hydrate and the effect of alkali hydroxide

    Cement and Concrete Research · 2022-09-19

    Yiru Yan, Bin Ma, George Dan Miron, Dmitrii A. Kulik, Karen Louise Scrivener, Barbara Lothenbach

    Read original paper ↗ ·
  50. Investigation of Pore Structure of Lightweight Ultra-High- Performance Concrete under Curing Regimes

    ACI Materials Journal · 2022-10-27

    Yang Li, Gaozhan Zhang, Jun Yang, Jian Zhang, Qingjun Ding

    Read original paper ↗ ·